07-28-2011, 01:33 PM
|
#25 (permalink)
|
|
Enthusiast Member
Join Date: Jul 2010
Location: SoCal
Posts: 490
Drives: 370Z
Rep Power: 3371
|
Quote:
Originally Posted by Dustin@Z1
The Setrab Brackets supplied in the kits can only be installed on the Driver's side of the core support. The combination of the A/C Dryer and OEM Power Steering Cooler hinders installation on that side unless you have a custom bracket made (..or relocate the factory PWS Cooler).
The question is, based on thoughts mentioned by TravisJB, is whether both cores are mounted close to the core support or not. I see that EventHorizon (Jason) mounted his close to the A/C core. I am not sure about GTKiller's install though.
GT can you chime in on this. I am curious to see if that may be another affecting variable.
|
To answer your question I mounted the Oil Cooler on the driver side using the mounting points your kit suggested. BTW great kit! I ran this kit at track events with outside temps above 100F never did my car go into limp mode. The highest oil temps I've seen during track events were 240+
The only difference is he has an intake and exhaust and mine is stock.
|
|
|
Similar Threads
Threaded Mode
