06-08-2011, 10:56 PM
|
#1 (permalink)
|
|
The370Z.com Sponsor
Join Date: Jun 2009
Location: NLA
Posts: 1,313
Drives: NLA
Rep Power: 19
|
Quote:
Originally Posted by spearfish25
Sounds good. You just gave me a reason to go to Autozone...always something I enjoy. But I'll come back with $100 worth of wax, interior wipes, washer fluid, etc etc most likely too!
What's the specified torque on that bolt? I thought it was something in the 15 lb-ft range.
|
Just a heads up...I just read on Racepartswholesale.com stating that the socket size you need is 1 1/8" ??? From what I measured, it was less than that, might go ahead and grab a 1 1/16" while you are at it (take it back when you re done).
As for the torque spec, there really is not a definitive answer. I have been digging around for about two hours looking and from what I can tell, the general rule of thumb is to torque it down roughly the same torque spec as the factory oil filter bolt. I do not have access to the FSM from my house, but I will gladly look it up when I get back in the office.
BTW... I agree with the autozone comment. I always end up getting more than what I needed originally. Thankfully AutoZone has the $20 rewards program, I cash in on that alot!
|
|
|
Similar Threads
Hybrid Mode
