Clutch pedal too soft/no feel? Remove the helper spring!

esfourteen · 08-11-2011, 11:01 AM

Yeah I got flooded with requests sorry, I might have an extra but I had to wait as 2 people in Texas did not receive theres and I wanted to make sure they got another one if it was lost.

Quote:

Originally Posted by V8Killer

Ya I would love to get my hands on one I was under the impression there were some left over and pm'd esfourteen but no reply.

LMBmikeZ · 08-11-2011, 12:31 PM

Ya there was a lot of people requesting one not just v8killer!

Also we are still waiting to her how others made out with the other springs they had found! Anyone have any luck?

V8Killer · 08-11-2011, 10:55 PM

Quote:

Originally Posted by esfourteen

Yeah I got flooded with requests sorry, I might have an extra but I had to wait as 2 people in Texas did not receive theres and I wanted to make sure they got another one if it was lost.

Okay well let me know when you get a chance. Also will this be a good upgrade with an upgraded clutch? I have a JWT clutch.

bluenoser · 08-11-2011, 11:05 PM

Quote:

Originally Posted by LMBmikeZ

Ya there was a lot of people requesting one not just v8killer!

Also we are still waiting to her how others made out with the other springs they had found! Anyone have any luck?

Ok there's good news and bad news. The Fastenal spring I mentioned earlier doesn't work. The inside diameter of the spring doesn't fit correctly over the assembly. I ordered the day after I measured it and I guess I wasn't paying close enough attention when I placed the order.

The good news is that I found another spring after I realized the error that definitely does work. P/N 72577 at Century Spring is the winner 72577 - COMPRESSION SPRING - Part Characteristics | Century Spring Corp. The spring rate is roughly 20% of the stock spring and it feels very similar to running without the spring installed. The bad news is that you need to order 4 of them to meet their minimum order quantity.

Here are some pics of the Century spring

Stock is on the left, Century on the right

Installed

LMBmikeZ · 08-13-2011, 12:59 PM

Are u sure that the fastenal spring doesn't work? Looking at the sizes and spec looks like it should be a go!

Anyway I'll be trying one of the ones from fastenal Monday when it gets here!

bluenoser · 08-13-2011, 04:51 PM

Quote:

Originally Posted by LMBmikeZ

Are u sure that the fastenal spring doesn't work? Looking at the sizes and spec looks like it should be a go!

Anyway I'll be trying one of the ones from fastenal Monday when it gets here!

The ID of the Fastenal spring is about 0.76". When you pull the assembly apart you can see the spring fits around a collar on the aluminum piece near the lower pin and around a sheet metal hat thing on the other end. The diameters of both the "hat" and the "collar" are around 0.83" so the spring should have a minimum ID of 0.84" to guarantee a good fit. You might be able to force the Fastenal spring to fit but probably not without tweaking it somehow. Sorry if my earlier post caused you to buy a useless spring, I jumped the gun a bit on that one...

LMBmikeZ · 08-13-2011, 07:00 PM

No worries it's np! My buddy who works there hooks it up with huge discounts!

These are the specs he gave me though for the #71 spring

OD - 1"
Wire size -.12"
Length - 2.5"
lbs capacity - 47lbs

Looks like it should work the ID would still be left at .88" but we will see if it fits on Monday!

N8GTOL · 08-14-2011, 02:14 PM

You need to subtract the wire size twice from the OD to get the ID. Your ID would then measure .76" which agrees with the numbers blue posted.

Vaughanabe13 · 08-17-2011, 08:53 AM

Quote:

Originally Posted by bluenoser

Ok there's good news and bad news. The Fastenal spring I mentioned earlier doesn't work. The inside diameter of the spring doesn't fit correctly over the assembly. I ordered the day after I measured it and I guess I wasn't paying close enough attention when I placed the order.

The good news is that I found another spring after I realized the error that definitely does work. P/N 72577 at Century Spring is the winner 72577 - COMPRESSION SPRING - Part Characteristics | Century Spring Corp. The spring rate is roughly 20% of the stock spring and it feels very similar to running without the spring installed. The bad news is that you need to order 4 of them to meet their minimum order quantity.

Here are some pics of the Century spring

Stock is on the left, Century on the right

Installed

So just to confirm, P/N 72577 at Century Spring does work and fixes the spring problem? If that's the case I'd be willing to get in on a group buy with 3 other people if anyone is interested.

adampetrasek · 08-17-2011, 11:00 AM

Quote:

Originally Posted by Vaughanabe13

So just to confirm, P/N 72577 at Century Spring does work and fixes the spring problem? If that's the case I'd be willing to get in on a group buy with 3 other people if anyone is interested.

I have that spring (Century Spring Product# 72577) installed. It fits perfect and only gets rid of the looseness of the clutch pedal when its not depressed. Otherwise feels like there is no spring installed. Exactly what i was looking for!!!

KingZee · 08-17-2011, 11:25 AM

Quote:

Originally Posted by adampetrasek

I have that spring (Century Spring Product# 72577) installed. It fits perfect and only gets rid of the looseness of the clutch pedal when its not depressed. Otherwise feels like there is no spring installed. Exactly what i was looking for!!!

I might do this too. The esfourteen spring is awesome but I want less.

bluenoser · 08-17-2011, 12:10 PM

Quote:

Originally Posted by adampetrasek

I have that spring (Century Spring Product# 72577) installed. It fits perfect and only gets rid of the looseness of the clutch pedal when its not depressed. Otherwise feels like there is no spring installed. Exactly what i was looking for!!!

I'm glad it's working out for you! I'm happy with it as well. The P/N is definitely 72577

Vaughanabe13 · 08-18-2011, 03:00 PM

So who else wants to get one? Looks like we do need to order 4 springs so somebody needs to buy and distribute. I'd be willing to do it if there are 3 other takers...

usmc_nick · 08-18-2011, 07:00 PM

Quote:

Originally Posted by Vaughanabe13

So who else wants to get one? Looks like we do need to order 4 springs so somebody needs to buy and distribute. I'd be willing to do it if there are 3 other takers...

Add me to the list. I want one asap!

KingZee · 08-18-2011, 07:26 PM

I switched my spring to the Century Spring part # so I have esfourteen's spring. PM me if you're interested.

08-11-2011, 12:31 PM	#227 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	Ya there was a lot of people requesting one not just v8killer! Also we are still waiting to her how others made out with the other springs they had found! Anyone have any luck? __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

08-13-2011, 12:59 PM	#230 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	Are u sure that the fastenal spring doesn't work? Looking at the sizes and spec looks like it should be a go! Anyway I'll be trying one of the ones from fastenal Monday when it gets here! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

08-13-2011, 07:00 PM	#232 (permalink)
LMBmikeZ A True Z Fanatic Join Date: May 2010 Location: Ontario, Canada Posts: 12,237 Drives: 40th Rep Power: 10349	No worries it's np! My buddy who works there hooks it up with huge discounts! These are the specs he gave me though for the #71 spring OD - 1" Wire size -.12" Length - 2.5" lbs capacity - 47lbs Looks like it should work the ID would still be left at .88" but we will see if it fits on Monday! __________________ CUSTOM NISMO \| BERK \| H&R \| STANCE \| SPL everything \| EVO-R \| 34 Setrab \| WHITELINE \| Redline \| Carkitcompany \| Zspeed \| UpRev \| SEIBON

08-18-2011, 03:00 PM	#238 (permalink)
Vaughanabe13 Enthusiast Member Join Date: Jul 2011 Location: Iowa Posts: 387 Drives: 09 Nissan 370Z M6 Rep Power: 13	So who else wants to get one? Looks like we do need to order 4 springs so somebody needs to buy and distribute. I'd be willing to do it if there are 3 other takers... __________________ 2009 Nissan 370Z Touring, w/sport, 6MT, chicane yellow/black.

08-18-2011, 07:26 PM	#240 (permalink)
KingZee A True Z Fanatic Join Date: Feb 2010 Location: Glendale, CA Age: 40 Posts: 2,612 Drives: Focus ST Rep Power: 423	I switched my spring to the Century Spring part # so I have esfourteen's spring. PM me if you're interested. __________________ Focus ST

08-14-2011, 02:14 PM	#233 (permalink)
N8GTOL Base Member Join Date: May 2010 Location: San Diego Posts: 228 Drives: and flies Rep Power: 21	You need to subtract the wire size twice from the OD to get the ID. Your ID would then measure .76" which agrees with the numbers blue posted.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
light clutch pedal?	boosted180	Engine & Drivetrain	21	06-07-2014 01:53 PM
clutch pedal issues?	xgrudgex	Engine & Drivetrain	17	01-31-2011 08:44 PM
How does your OEM clutch feel?	AlphaSnacks	Engine & Drivetrain	78	12-20-2010 11:04 AM
Knock from the clutch pedal	Oscar135	Engine & Drivetrain	34	07-27-2010 12:10 PM