Oil cooler thoughts

ChrisSlicks · 04-04-2011, 10:05 AM

Quote:

Originally Posted by RCZ

FWIW. I had the Stillen 19 row and that was not enough to keep me comfortable on the track. Switched to a Jnaut hybrid and I haven't seen temps past 220 yet, but I haven't taken it to the track. For my next oil change I'm switching over to a GTM 34row cooler, they have the best price for the biggest core. GTM's 34 row cooler is listed as 13X2X10.25 = 266ci. The Z1 Cooler is listed as 13X1.25X10.25 = 166ci.

The question is...is GTM's core really that much bigger or is there a typo on their website. Can comment on this? GTM?

GTM uses the series 6 Setrab core which are all 2" thick. Z1 uses the series 6 Setrab core as well so it should also be 2" thick, I believe that is just a typo.

I have the 72 row series 1 and if I keep the RPM's above 5k continuously with lots of full throttle then the temperature slowly climbs to 260F after 30 minutes in high ambient temps. If you back off a hair then the temperature stabilizes, if you go up a gear for a lap then the temperature does drop a bit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM
Thoughts on 09 WRX?	blinkme323	Other Vehicles	14	08-27-2009 02:43 PM
Thoughts/Opinions Please	dainedazz	Exterior & Interior	12	08-23-2009 10:21 AM