Oil cooler thoughts

Red__Zed · 04-03-2011, 07:38 PM

Quote:

Originally Posted by esfourteen

Go with the 25 row if you plan on ever seeing the track.

Is there anything that backs up the 19 not being enough?

Nikkolai · 04-03-2011, 07:41 PM

I say go Modshack; most cost effective and gets the job done.

Red__Zed · 04-03-2011, 07:42 PM

Quote:

Originally Posted by Nikkolai

I say go Modshack; most cost effective and gets the job done.

Don't have the tools/time. I'm living between two apartments, and most of my tools have been lost, stolen, or given away through the moves.

Jamaica · 04-03-2011, 07:43 PM

Quote:

Originally Posted by Red__Zed

Is there anything that backs up the 19 not being enough?

i dont think 19 will be enough for a track.

esfourteen · 04-03-2011, 10:20 PM

Quote:

Originally Posted by Red__Zed

Is there anything that backs up the 19 not being enough?

im sure it depends on the type of track, oil used, and how much power you are making, but from other comments I've seen the 19 row was still able to get into the 240's on a hot track day. Also if you are considering going FI in the future it's even more of a reason to go with a larger cooler now.

FWIW I have the 25 row Z1 kit, its a great kit but my only compliant would be using lines that are maybe a bit thicker than necessary, makes it difficult to route the lines but once it's in it's fine.

Red__Zed · 04-03-2011, 10:22 PM

Quote:

Originally Posted by esfourteen

im sure it depends on the type of track, oil used, and how much power you are making, but from other comments I've seen the 19 row was still able to get into the 240's on a hot track day. Also if you are considering going FI in the future it's even more of a reason to go with a larger cooler now.

Definitely not going FI on this platform.

esfourteen · 04-03-2011, 10:29 PM

Quote:

Originally Posted by Red__Zed

Definitely not going FI on this platform.

I wish I could say the same, I battle with this question daily

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
Oil Cooler.....Trans Cooler...	kannibul	Engine & Drivetrain	6	12-31-2009 06:32 PM
Thoughts on 09 WRX?	blinkme323	Other Vehicles	14	08-27-2009 02:43 PM
Thoughts/Opinions Please	dainedazz	Exterior & Interior	12	08-23-2009 10:21 AM

04-03-2011, 07:41 PM	#2 (permalink)
Nikkolai Base Member Join Date: Jun 2010 Location: DFW Posts: 238 Drives: Boss 302, Frontier Rep Power: 17	I say go Modshack; most cost effective and gets the job done.