Clutch Rattle

cossie1600 · 10-19-2010, 11:14 PM

I think it is something with the input shaft rattling according to the 350 guys. Of course it sounds like a throw out bearing to me. It is annoying.

ROC1ROB · 10-20-2010, 11:39 AM

I pulled up to my friendly Dunkin Donuts drive thru the other day and was sitting there enjoying my marbles inside my tranny (Sounds like it to me). I raised the idle a bit (100 rpm maybe) and it went away. Hmmm I thought. I'm not really a fan of these trannys but si far so good. I just try to ignore the noises................ I said "try".

FERRARI · 10-21-2010, 11:57 AM

Could it be that the engine and tranny are not braced enough and that is where the problems I read about are coming from ?

Ridgerunner · 11-09-2010, 10:39 PM

Previously when driving in garage after a drive, I noticed a sound like coolant boiling over into the overflow resevoir you get from heat picking up since you came to a stop. I usually have the radio on so I sort of ignored it. Yesterday I noticed I could feel it in the clutch pedal, then I noticed the noise went away if I let off clutch and put it in nuetral. I guess this is what the rest of you guys call the clutch rattle? I hate it when you take something to the dealer and they say they don't hear it or " Oh, that's normal" I was thinking about taking it in, now it seems this is normal

DEVIL_Z · 11-10-2010, 12:18 AM

the dealer don't wanna fix yah sh iiiit man they are a bunch of pricks... I get use to the rattle because when I had my 98 ex civic I had poly urethane motor mount inserts and man that was a bi ttch rattle loud as fc uuuuuuuck but you get use to it just give it time. if your tranny Fc uuuuucks up and you modified your z and bring it to them they;ll say you done that shiiiiiiii t ahhahah

370zjames · 11-11-2010, 01:35 AM

I have same problem!!! It is hella annoying!!!!!!!!!

370zjames · 11-11-2010, 01:50 AM

I'm not big fan of nissan tranny!!!!!! ANYONE GOT THIS FIXED ON UR Z???

NISMOFO · 11-11-2010, 01:39 PM

So I sat in another forum member's car the other day......he has the rattle as well...just not as bad as mine. He bled his clutch fluid because he suspected air was in there.

I'm not sure if this helps, but has anyone else bled their clutch to see if it made a difference?

370zjames · 11-16-2010, 01:10 AM

dame.. Mine is getting worst!!!! Just can't stand it sometimes!!

dirTy_shoeZ · 11-16-2010, 06:51 AM

This z is no different from any other z.. Guys with z32s,z31s these things can be a bit womanish from time to time... But like all z's once u get them down... Well that's why u can't have just one

Just gotta roll with the punches and if u take care of her she'll take care of you.

TypeOne · 11-16-2010, 04:30 PM

I feel it as well... not to mention my throw out bearing seems to be making more noise than normal. It only has 14k miles on it so far and the sound seems to go away when I press the clutch down.

When driving the car at low speeds it also tends to make a clunking sound.

I don't think its anything serious, could just be the bearings that are used in the clutch kits, but I find it a little loud for a new car.

This may be related to the CMC issue I read about on here. Failing or weak CMCs could be wearing out the other clutch components faster than normal... I don't think that is going to affect the TOB but hey, you never know. ;-)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rattle?	370zproject	Nissan 370Z General Discussions	15	06-21-2011 02:01 AM
Clutch Click now... to go with the clutch clunk.	jayl	Engine & Drivetrain	6	09-03-2010 01:27 PM
When the clutch is released, I hear rattle sound	xjyme	Engine & Drivetrain	4	06-02-2010 11:24 AM
very loud clutch chatter when in first gear and i depress the clutch...	TheSnakeJake	Engine & Drivetrain	30	04-25-2010 12:07 AM
370Z Clutch vs. 350Z Clutch	cheeyo	Nissan 370Z General Discussions	8	01-28-2009 05:48 PM

10-19-2010, 11:14 PM	#16 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	I think it is something with the input shaft rattling according to the 350 guys. Of course it sounds like a throw out bearing to me. It is annoying.

10-20-2010, 11:39 AM	#17 (permalink)
ROC1ROB Base Member Join Date: May 2010 Location: AZ Posts: 201 Drives: 09 MT BS Base/Sports Rep Power: 14	I pulled up to my friendly Dunkin Donuts drive thru the other day and was sitting there enjoying my marbles inside my tranny (Sounds like it to me). I raised the idle a bit (100 rpm maybe) and it went away. Hmmm I thought. I'm not really a fan of these trannys but si far so good. I just try to ignore the noises................ I said "try".

10-21-2010, 11:57 AM	#18 (permalink)
FERRARI Enthusiast Member Join Date: Jan 2009 Location: Chattanooga, Tennessee Posts: 324 Drives: PERFECTION Rep Power: 492	Could it be that the engine and tranny are not braced enough and that is where the problems I read about are coming from ?

11-09-2010, 10:39 PM	#19 (permalink)
Ridgerunner Base Member Join Date: Jul 2010 Location: Arkansas Posts: 79 Drives: 09 370Z Black 6M SP Rep Power: 14	Previously when driving in garage after a drive, I noticed a sound like coolant boiling over into the overflow resevoir you get from heat picking up since you came to a stop. I usually have the radio on so I sort of ignored it. Yesterday I noticed I could feel it in the clutch pedal, then I noticed the noise went away if I let off clutch and put it in nuetral. I guess this is what the rest of you guys call the clutch rattle? I hate it when you take something to the dealer and they say they don't hear it or " Oh, that's normal" I was thinking about taking it in, now it seems this is normal

11-10-2010, 12:18 AM	#20 (permalink)
DEVIL_Z Base Member Join Date: Dec 2009 Location: richmond tx Posts: 73 Drives: 370z red sport Rep Power: 15	the dealer don't wanna fix yah sh iiiit man they are a bunch of pricks... I get use to the rattle because when I had my 98 ex civic I had poly urethane motor mount inserts and man that was a bi ttch rattle loud as fc uuuuuuuck but you get use to it just give it time. if your tranny Fc uuuuucks up and you modified your z and bring it to them they;ll say you done that shiiiiiiii t ahhahah

11-11-2010, 01:35 AM	#21 (permalink)
370zjames Enthusiast Member Join Date: Sep 2010 Location: Silverdale, WA Posts: 404 Drives: 10' 370Z 6MT/ Sports Rep Power: 14	I have same problem!!! It is hella annoying!!!!!!!!!

11-11-2010, 01:50 AM	#22 (permalink)
370zjames Enthusiast Member Join Date: Sep 2010 Location: Silverdale, WA Posts: 404 Drives: 10' 370Z 6MT/ Sports Rep Power: 14	I'm not big fan of nissan tranny!!!!!! ANYONE GOT THIS FIXED ON UR Z???

11-11-2010, 01:39 PM	#23 (permalink)
NISMOFO Enthusiast Member Join Date: Jan 2009 Location: McKinney, TX Posts: 269 Drives: 370Z Rep Power: 16	So I sat in another forum member's car the other day......he has the rattle as well...just not as bad as mine. He bled his clutch fluid because he suspected air was in there. I'm not sure if this helps, but has anyone else bled their clutch to see if it made a difference?

11-16-2010, 01:10 AM	#24 (permalink)
370zjames Enthusiast Member Join Date: Sep 2010 Location: Silverdale, WA Posts: 404 Drives: 10' 370Z 6MT/ Sports Rep Power: 14	dame.. Mine is getting worst!!!! Just can't stand it sometimes!!

11-16-2010, 06:51 AM	#25 (permalink)
dirTy_shoeZ Track Member Join Date: Jul 2010 Location: san antonio, tx Posts: 779 Drives: 40th ANN TT Rep Power: 15	This z is no different from any other z.. Guys with z32s,z31s these things can be a bit womanish from time to time... But like all z's once u get them down... Well that's why u can't have just one Just gotta roll with the punches and if u take care of her she'll take care of you.

11-16-2010, 04:30 PM	#26 (permalink)
TypeOne A True Z Fanatic Join Date: Jul 2010 Location: Baton Rouge, LA Posts: 2,682 Drives: BSM 370 Rep Power: 1850	I feel it as well... not to mention my throw out bearing seems to be making more noise than normal. It only has 14k miles on it so far and the sound seems to go away when I press the clutch down. When driving the car at low speeds it also tends to make a clunking sound. I don't think its anything serious, could just be the bearings that are used in the clutch kits, but I find it a little loud for a new car. This may be related to the CMC issue I read about on here. Failing or weak CMCs could be wearing out the other clutch components faster than normal... I don't think that is going to affect the TOB but hey, you never know. ;-)