Carbon Fiber Drive Shaft

jetguy · 06-11-2010, 01:20 PM

was just reading the article on the new SLS amg and they were saying how cool its cf drive shaft was."scant 9 lb." roadandtrack mag july2010 pg 44.

anyone know how much our cf drive shaft weighs?

Nick911sc · 06-11-2010, 01:25 PM

Let me google that for you

FuszNissan · 06-11-2010, 01:28 PM

Ours is reinforced carbon, so it will weight more then the SLS

jetguy · 06-11-2010, 01:33 PM

so nick, what did you find on google?

kenchan · 06-11-2010, 01:34 PM

that just sounds like another part that can break on the benz.

Nick911sc · 06-11-2010, 01:53 PM

I found on Google that it's not really made for weight saving since it is not fully carbon fiber. But aids in the vehicle stability if there is a front end collision almost like a spring to stop the impact further away from the cabin of the vehicle.

Modshack · 06-11-2010, 02:41 PM

Quote:

Originally Posted by kenchan

that just sounds like another part that can break on the benz.

Vette's have CF shafts too and Gawd knows they're abused! Differentials explode and axles break but not the driveshaft!

Less rotational mass and weight is the benefit..

jetguy · 06-11-2010, 02:46 PM

Man...that safety stuff isnt as sexy as the mercs 9lb weight..oh well. would be cool if someone could come up with an actual weight of ours though.
Our cars have SO many cool/exotic features that not many people talk about on here too often, like the carbon fiber drive shaft, and one that always gets my juices flowing are the MAGNESIUM PADDLE SHIFTERS WITH PERFORATED LEATHER INSERTS!! i mean if thats not sexy ,then what is?

Liquid_G · 06-11-2010, 03:10 PM

Quote:

Originally Posted by Nick911sc

Let me google that for you

haha the first link in google is this thread

WShade · 06-11-2010, 03:11 PM

Quote:

Originally Posted by Modshack

Vette's have CF shafts too and Gawd knows they're abused! Differentials explode and axles break but not the driveshaft!

Less rotational mass and weight is the benefit..

My bestfriend and I separated the yoke from a CF shaft in his '93 ZR1 w/ slicks and a Lingenfelter 368

Although, more than likely a bad shaft. We went back to the aluminum one and now all we break are axles.

esfourteen · 06-11-2010, 03:38 PM

Quote:

Originally Posted by Liquid_G

haha the first link in google is this thread

thats googles new indexer for you

1slow370 · 06-12-2010, 06:57 AM

i like to think of our driveshaft as less of carbon fiber and more of carbon fiber reinforced plastic. it like radiator core support material with a different blend. i work with real carbon fiber tubes at my work and that stuff is waaaay different from our drive shaft and hella strong/light. a half inch wall 3" diameter tube with fiberglass cladding weighs around ten pounds at 4' length. and those shafts hold up over a ton of weight, and thats after we punch a ton holes in it. the plastic is garbage in comparison that is designed to snap in half in an accident so it doesn't enter the cabin or force the motor up into the firewall.

jetguy · 06-13-2010, 07:39 AM

I also used to work with advanced composite in an aerospace application.

CBRich · 06-13-2010, 08:44 PM

So no one has the testes to just yank their's off and weigh it? Well by God I'm all over it next weekend if no one's done it.

jnaut · 06-13-2010, 09:55 PM

I have had mine out a couple times but never weighed it If I had to guess prolly say 15 to 17 Lbs .

06-11-2010, 01:20 PM	#1 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	Carbon Fiber Drive Shaft was just reading the article on the new SLS amg and they were saying how cool its cf drive shaft was."scant 9 lb." roadandtrack mag july2010 pg 44. anyone know how much our cf drive shaft weighs?

06-11-2010, 01:28 PM	#3 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	Ours is reinforced carbon, so it will weight more then the SLS __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

06-12-2010, 06:57 AM	#12 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	i like to think of our driveshaft as less of carbon fiber and more of carbon fiber reinforced plastic. it like radiator core support material with a different blend. i work with real carbon fiber tubes at my work and that stuff is waaaay different from our drive shaft and hella strong/light. a half inch wall 3" diameter tube with fiberglass cladding weighs around ten pounds at 4' length. and those shafts hold up over a ton of weight, and thats after we punch a ton holes in it. the plastic is garbage in comparison that is designed to snap in half in an accident so it doesn't enter the cabin or force the motor up into the firewall. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

06-13-2010, 09:55 PM	#15 (permalink)
jnaut A True Z Fanatic Join Date: Dec 2009 Location: wpb, fl Posts: 1,146 Drives: 09 370z Rep Power: 17	I have had mine out a couple times but never weighed it If I had to guess prolly say 15 to 17 Lbs . __________________ Best 1/4 mile 12.24 Best mph 114.5_______

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2010, 01:25 PM	#2 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	Let me google that for you

06-11-2010, 01:33 PM	#4 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	so nick, what did you find on google?

06-11-2010, 01:34 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	that just sounds like another part that can break on the benz.

06-11-2010, 01:53 PM	#6 (permalink)
Nick911sc A True Z Fanatic Join Date: Feb 2009 Location: Long Island, New York Posts: 1,698 Drives: 2010 Nissan GT-R Rep Power: 20	I found on Google that it's not really made for weight saving since it is not fully carbon fiber. But aids in the vehicle stability if there is a front end collision almost like a spring to stop the impact further away from the cabin of the vehicle.

06-11-2010, 02:46 PM	#8 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	Man...that safety stuff isnt as sexy as the mercs 9lb weight..oh well. would be cool if someone could come up with an actual weight of ours though. Our cars have SO many cool/exotic features that not many people talk about on here too often, like the carbon fiber drive shaft, and one that always gets my juices flowing are the MAGNESIUM PADDLE SHIFTERS WITH PERFORATED LEATHER INSERTS!! i mean if thats not sexy ,then what is?

06-13-2010, 07:39 AM	#13 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 15	I also used to work with advanced composite in an aerospace application.

06-13-2010, 08:44 PM	#14 (permalink)
CBRich A True Z Fanatic Join Date: Apr 2009 Location: SC Posts: 2,464 Drives: 370Z Rep Power: 544	So no one has the testes to just yank their's off and weigh it? Well by God I'm all over it next weekend if no one's done it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Nightmare and SEIBON Carbon	motoextreme	Exterior & Interior	36	06-16-2010 02:44 AM
Dry carbon fiber	370z TT	Exterior & Interior	15	05-08-2010 11:55 PM
WTT: My carbon fiber FI for your SS FI ~ PA/NJ	pgrmstr	Intake/Exhaust	6	03-13-2010 05:03 PM
WTT: My carbon fiber FI for your SS FI ~ PA/NJ	pgrmstr	Parts for sale (Private Classifieds)	3	03-13-2010 02:19 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM