“Wear scar on VVEL actuator lobe”

Smokey Nagata · 07-16-2022, 09:20 PM

First would like to say hello; this is my first posting on this forum so would like to thank all members who contribute too and assist on this forum.

Does anyone have an idea as to what may be causing this scar on my VVEL lobe pictures posted below. I originally observed the scaring and thought it was my camshaft and was relieved to realize that this part is apart of the VVEl system that sits atop the intake camshaft. I check my oil regularly and have been using Redline 5W30 for the past 5200 miles, the Z has 36000 miles on her and I’m wondering if this is just a manufacturing defect that is slowly becoming more visibly apparent or if something else could be going on ? The cam and valve train components all looked spotless otherwise in these images so some further insight is warranted. Also in rubbing my fingers along the scarring it is not identifiable and feels just as smooth as the rest of that particular piece.

Rusty · 07-16-2022, 09:43 PM

Looks like part of the machining process. The rollers on the followers look good.

Smokey Nagata · 07-16-2022, 09:54 PM

Quote:

Originally Posted by Rusty

Looks like part of the machining process. The rollers on the followers look good.

Thank you for the timely response Rusty. Have read a lot of your advice and helpful entries on this site before applying to become a member.

So in your opinion if this scar continues to grow it is mostly non problematic and an apparent mark created by the manufacturing processes ?

husam2012 · 07-16-2022, 10:07 PM

Quote:

Originally Posted by Smokey Nagata

First would like to say hello; this is my first posting on this forum so would like to thank all members who contribute too and assist on this forum.

Does anyone have an idea as to what may be causing this scar on my VVEL lobe pictures posted below. I originally observed the scaring and thought it was my camshaft and was relieved to realize that this part is apart of the VVEl system that sits atop the intake camshaft. I check my oil regularly and have been using Redline 5W30 for the past 5200 miles, the Z has 36000 miles on her and I’m wondering if this is just a manufacturing defect that is slowly becoming more visibly apparent or if something else could be going on ? The cam and valve train components all looked spotless otherwise in these images so some further insight is warranted. Also in rubbing my fingers along the scarring it is not identifiable and feels just as smooth as the rest of that particular piece.

The VVEL looks like that from the factory, that part does not come in contact with anything else so it's not anything to worry about.

Your other picture on the other hand looks like it has an upgraded aftermarket rear bumper, definitely not a manufacturer defect.

Falconquey · 07-16-2022, 10:12 PM

Quote:

Originally Posted by husam2012

The VVEL looks like that from the factory, that part does not come in contact with anything else so it's not anything to worry about.

Your other picture on the other hand looks like it has an upgraded aftermarket rear bumper, definitely not a manufacturer defect.

DrBacon · 07-16-2022, 10:52 PM

Quote:

Originally Posted by husam2012

The VVEL looks like that from the factory, that part does not come in contact with anything else so it's not anything to worry about.

Your other picture on the other hand looks like it has an upgraded aftermarket rear bumper, definitely not a manufacturer defect.

We call those "factory freaks"

Smokey Nagata · 07-17-2022, 02:55 AM

Quote:

Originally Posted by husam2012

The VVEL looks like that from the factory, that part does not come in contact with anything else so it's not anything to worry about.

Your other picture on the other hand looks like it has an upgraded aftermarket rear bumper, definitely not a manufacturer defect.

Thank you for that information. Haha I noticed I added that image once I previewed my post and decided what the hell something for the enthusiast to enjoy

07-16-2022, 09:43 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,942 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Looks like part of the machining process. The rollers on the followers look good. Optimiser and Falconquey like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vvel actuator motors interchangeable?	Vq240z	Engine & Drivetrain	1	01-05-2021 07:39 PM
VVEL Actuator Holding Jigg!!!!	laytonanthony	Engine & Drivetrain	3	10-19-2015 12:16 PM
The door jamb actuator switch.	Limeybastard	Exterior & Interior	7	10-23-2014 10:51 PM
Does anyone have the metal securer on the actuator for sale?	ohohoh123456	Nissan 370Z General Discussions	0	05-15-2014 07:39 PM
HKS Internal Wastegate Actuator	G37sHKS	Forced Induction	3	09-13-2011 04:16 PM