Massive coolant leak/geyser out of nowhere after fixing misfire??

JSON · 01-24-2021, 04:38 PM

Quote:

Originally Posted by Rusty

The heater hose bleed valve splice have been known to leak. That's is where the green cap is in the video. The very back of the motor. You have a couple of connections there. The hoses for the throttle bodies for one.

I think the heater connector is completely gone, like you said. It's just replacing this part, filling coolant back up, and try to bleed air bubble by leaving engine/heater on with reservoir cap removed?

https://www.nissanpartsdeal.com/part...417-jk20a.html

Wonder if the Z1 aluminum replacement worth it for almost 30 buckss

http://www.z1motorsports.com%2Fz1-pr...Crhj7RMSYewmss

Rusty · 01-24-2021, 04:52 PM

I have the Z1 part. That's where my aftermarket water temp gauge sensor goes to.

JSON · 01-25-2021, 12:04 PM

Quote:

Originally Posted by Rusty

I have the Z1 part. That's where my aftermarket water temp gauge sensor goes to.

They don't have the one with bleeder screw in stock until Feb...I think I'll just get the stock plastic part so I can fix it for now.

You burp the cooling system by leaving the radiator cap off and letting engine warm up with heaters on, correct?

Rusty · 01-25-2021, 12:56 PM

You can do it that way. It will take a while.

JSON · 01-25-2021, 05:39 PM

Quote:

Originally Posted by Rusty

You can do it that way. It will take a while.

Any tips on getting the spring clamps off the hoses and broken pieces out of the hoses?

Those spring clamps do not wanna budge...hard to fit a vice grip in that small open space. My hands scraped up trying to get those clamps off to get the broken pieces out.

Rusty · 01-25-2021, 06:28 PM

Quote:

Originally Posted by JSON

Any tips on getting the spring clamps off the hoses and broken pieces out of the hoses?

Those spring clamps do not wanna budge...hard to fit a vice grip in that small open space. My hands scraped up trying to get those clamps off to get the broken pieces out.

Remove the cross bar and the throttle body for more room.

JSON · 01-25-2021, 08:39 PM

Quote:

Originally Posted by Rusty

Remove the cross bar and the throttle body for more room.

Tried but still not enough room. Also probably doesn't help I'm limited on tools and my vice grip is prob the wrong size. Might grab one of these tomorrow...busted up my arm trying to get to them already.

https://shop.advanceautoparts.com/p/...235%7CL4*13430

01-24-2021, 04:52 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,575 Drives: 2011 Nismo GM 6M Rep Power: 2684440	I have the Z1 part. That's where my aftermarket water temp gauge sensor goes to. Spooler likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-25-2021, 12:56 PM	#4 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,575 Drives: 2011 Nismo GM 6M Rep Power: 2684440	You can do it that way. It will take a while. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolant Leak	dts3	Engine & Drivetrain	16	02-24-2020 05:28 PM
Coolant Leak	lhinojos	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	11	08-07-2019 06:12 PM
DIY: Fixing an exhaust leak	ThatZ34	DIY Section (Do-It-Yourself)	0	08-14-2017 11:31 PM
Radiator cap? coolant leak	Darwins Child	Engine & Drivetrain	35	08-16-2016 02:28 AM