Magnet in the oil pan. . . Oops?

Rusty · 10-28-2020, 12:32 PM

Quote:

Originally Posted by Chuck33079

Yup. Mistakes like your mother carrying you to term.

It would have if your mother had used it early enough, but here we are.

200k+ Covid deaths yet you somehow you're not one of them. There is truly no justice in this universe.

LMFAO.

I got tears in my eyes.

That is some course 00 sandpaper right there.

Spooler · 10-28-2020, 02:47 PM

Quote:

Originally Posted by Rusty

LMFAO.

I got tears in my eyes.

That is some course 00 sandpaper right there.

Oh Yeah, he made me laugh MAO today. I needed that.

sx moneypit · 10-28-2020, 04:23 PM

Quote:

Originally Posted by Rusty

LMFAO.

I got tears in my eyes.

That is some course 00 sandpaper right there.

Zyonara91 · 10-29-2020, 09:06 AM

Hey guys,

Just wanted to let you know my OCD won the battle. Dropped the pan and just took the magnet out, man was that RTV silicone on tight. I cleaned the pan out, cleaned the mating surface of the upper oil pan portion, used RTV again and bolted it back up, letting it sit for 24 hours before I pour in the oil.

Thanks for all the suggestions and all the help, I appreciate it.

Rusty · 10-29-2020, 12:35 PM

Quote:

Originally Posted by Zyonara91

Hey guys,

Just wanted to let you know my OCD won the battle. Dropped the pan and just took the magnet out, man was that RTV silicone on tight. I cleaned the pan out, cleaned the mating surface of the upper oil pan portion, used RTV again and bolted it back up, letting it sit for 24 hours before I pour in the oil.

Thanks for all the suggestions and all the help, I appreciate it.

Did you plug in the flux capacitor that Nissan installed but never plugs in since you had the pan off? It sits above the oil pick up tube. Next to the cranker, with the Johnson rods.

Zyonara91 · 10-30-2020, 02:43 PM

Quote:

Originally Posted by Rusty

Did you plug in the flux capacitor that Nissan installed but never plugs in since you had the pan off? It sits above the oil pick up tube. Next to the cranker, with the Johnson rods.

My Johnson rod is Brown. Is it suppose to be a different color?

nandosman · 10-31-2020, 06:01 PM

This happened to me and I ended up taking down the pan. Peace of mind.

Broken magnetic oil plug

10-29-2020, 09:06 AM	#19 (permalink)
Zyonara91 Enthusiast Member Join Date: Jun 2016 Location: GTA Posts: 368 Drives: 2010-Red-6spd-S/T Rep Power: 15755	Hey guys, Just wanted to let you know my OCD won the battle. Dropped the pan and just took the magnet out, man was that RTV silicone on tight. I cleaned the pan out, cleaned the mating surface of the upper oil pan portion, used RTV again and bolted it back up, letting it sit for 24 hours before I pour in the oil. Thanks for all the suggestions and all the help, I appreciate it. JARblue, Rusty, Jayhovah and 2 others like this. __________________ 2FT3PDLZ

10-31-2020, 06:01 PM	#22 (permalink)
nandosman Enthusiast Member Join Date: Mar 2017 Location: IL, US Posts: 343 Drives: 2014 370Z T/S Rep Power: 8	This happened to me and I ended up taking down the pan. Peace of mind. Broken magnetic oil plug __________________ FI Non-Res Test Pipes \| FI 18" Res CBE \| Stillen Gen 3 CAI \| Dynotuned @ Dynosty EcuTek 325 whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oops	chii370	Engine & Drivetrain	50	08-05-2014 05:36 PM
Oops!!!	onzedge	The Lounge (Off Topic)	25	08-06-2012 02:29 PM
Oops......went to a BMW dealership.........	Holliday	Nissan 370Z General Discussions	107	03-09-2011 12:07 AM
Gas Cap Oops	ProfessorDave	Nissan 370Z General Discussions	5	12-31-2010 11:12 AM