Any turn key built motors?

Randomizer23 · 09-27-2020, 12:53 PM

Looking to go forced induction eventually and my end goal is 800whp. I know a slight amount about built motors and am curious if there are any turn key motors that can support this power? I was looking at IPT's engines and their stage 3 long block but I don't know what else I would need to get the engine running with my FI TT kit.

Randomizer23 · 09-28-2020, 02:09 PM

wow 373 views no replies lol.... does no one know anything abt this subject am i posting in the wrong spot?

cv129 · 09-28-2020, 02:32 PM

Quote:

Originally Posted by Randomizer23

wow 373 views no replies lol.... does no one know anything abt this subject am i posting in the wrong spot?

Forced Induction - Nissan 370Z Forum

Post it in the forced induction section should yield more responses

Spooler · 09-28-2020, 03:17 PM

All I have to say is www.Mazworx.com You are right at that HP level that blows headgaskets. Want to do it twice? It's not fun. You can read my thread and find out how fun it is.

Whjaxn17 · 09-28-2020, 03:18 PM

Quote:

Originally Posted by Randomizer23

Looking to go forced induction eventually and my end goal is 800whp. I know a slight amount about built motors and am curious if there are any turn key motors that can support this power? I was looking at IPT's engines and their stage 3 long block but I don't know what else I would need to get the engine running with my FI TT kit.

Call SOHO Motorsports in North Carolina. George will likely be the 1 to pick the phone up. Him or Nik, either 1 can help with whatever you need.

Your only other high level option is Mazworx like Spooler mentioned.

cv129 · 09-28-2020, 04:33 PM

Whoa as recently as mid Sept, OP was only aiming at 520whp. 800whp range is a whole new can of worms for this motor, as two posts above suggest.

Go to Soooler’s thread, read, then read, then read again, that journal is the truth, no lies no bs. You won’t find any other FI thread at this whp level that openly discloses every failure and solution like Spooler did.

Best of luck!

Spooler · 09-28-2020, 09:44 PM

Quote:

Originally Posted by cv129

Whoa as recently as mid Sept, OP was only aiming at 520whp. 800whp range is a whole new can of worms for this motor, as two posts above suggest.

Go to Spooler’s thread, read, then read, then read again, that journal is the truth, no lies no bs. You won’t find any other FI thread at this whp level that openly discloses every failure and solution like Spooler did.

Best of luck!

I had someone ask me why I shared so much. I don't know, That's just who I am. If someone wants to gain knowledge, it is there for the taking.

Randomizer23 · 09-29-2020, 08:39 AM

Quote:

Originally Posted by cv129

Whoa as recently as mid Sept, OP was only aiming at 520whp. 800whp range is a whole new can of worms for this motor, as two posts above suggest.

Go to Soooler’s thread, read, then read, then read again, that journal is the truth, no lies no bs. You won’t find any other FI thread at this whp level that openly discloses every failure and solution like Spooler did.

Best of luck!

Thank you! I figured if I am going FI I should go all the way!

Raheel999 · 01-24-2021, 08:10 AM

Quote:

Originally Posted by Randomizer23

Looking to go forced induction eventually and my end goal is 800whp. I know a slight amount about built motors and am curious if there are any turn key motors that can support this power? I was looking at IPT's engines and their stage 3 long block but I don't know what else I would need to get the engine running with my FI TT kit.

Hey .. i hope you found a garage .. but most of the people i know who runs 800 to 900 hp vq they all blowed up the motors many times .. its too risky on these motors to be reliable at 800hp easiest thing you can do is swap the motor to vr38 out of any gtr and on stock turbos you can make 800 hp and it will be reliable ..i hope it helps

Spooler · 01-24-2021, 11:19 AM

Quote:

Originally Posted by Raheel999

Hey .. i hope you found a garage .. but most of the people i know who runs 800 to 900 hp vq they all blowed up the motors many times .. its too risky on these motors to be reliable at 800hp easiest thing you can do is swap the motor to vr38 out of any gtr and on stock turbos you can make 800 hp and it will be reliable ..i hope it helps

New things have been tried and are working like a champ. Not sure who built the people you know motors. VR38's blow up also.

Elmo370z · 01-24-2021, 02:00 PM

Quote:

Originally Posted by Raheel999

Hey .. i hope you found a garage .. but most of the people i know who runs 800 to 900 hp vq they all blowed up the motors many times .. its too risky on these motors to be reliable at 800hp easiest thing you can do is swap the motor to vr38 out of any gtr and on stock turbos you can make 800 hp and it will be reliable ..i hope it helps

Just bad information.

Spooler · 01-24-2021, 02:44 PM

Quote:

Originally Posted by Elmo370z

Just bad information.

Yeah, there is lots of that going on.

Rusty · 01-24-2021, 04:26 PM

Quote:

Originally Posted by Elmo370z

Just bad information.

Quote:

Originally Posted by Spooler

Yeah, there is lots of that going on.

What did you expect.........facecrap.

Just look at some of the new posts.

shadow85 · 03-20-2022, 06:39 AM

Mazworx long block stage 3 motor is only $15K opposed to Soho HB $20K.

Is the extra $5K soho hb worth it over the Mazworx?

VHRpurr · 03-20-2022, 03:19 PM

AAM has shortblocks and longblocks. Although, I’d go Mazworx.

09-27-2020, 12:53 PM	#1 (permalink)
Randomizer23 Base Member Join Date: Jul 2020 Location: Ontario Posts: 89 Drives: 09 370Z GM MAN Rep Power: 4	Any turn key built motors? Looking to go forced induction eventually and my end goal is 800whp. I know a slight amount about built motors and am curious if there are any turn key motors that can support this power? I was looking at IPT's engines and their stage 3 long block but I don't know what else I would need to get the engine running with my FI TT kit.

09-28-2020, 03:17 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,508 Drives: 2013 Nismo 370z Rep Power: 2684391	All I have to say is www.Mazworx.com You are right at that HP level that blows headgaskets. Want to do it twice? It's not fun. You can read my thread and find out how fun it is. cv129 and jchammond like this. Last edited by Spooler; 01-24-2021 at 07:00 PM.

09-28-2020, 04:33 PM	#6 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,191 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	Whoa as recently as mid Sept, OP was only aiming at 520whp. 800whp range is a whole new can of worms for this motor, as two posts above suggest. Go to Soooler’s thread, read, then read, then read again, that journal is the truth, no lies no bs. You won’t find any other FI thread at this whp level that openly discloses every failure and solution like Spooler did. Best of luck! Rusty, sx moneypit and Whjaxn17 like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield Last edited by cv129; 09-28-2020 at 04:38 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turn knob and A/C turns on. Can i turn it off?	zmyride	Nissan 370Z Owners Manual / Service Manuals	18	04-24-2015 01:17 PM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
EVS Motors & GoPro	Robert_K	Texas	0	08-09-2011 02:40 PM
Local Motors Kit Car	DckChang	Nissan 370Z General Discussions	2	03-16-2011 10:12 AM
First Turn-by-Turn Navigation App for iPhone: XROADS G-Map Review	AK370Z	The Lounge (Off Topic)	5	12-12-2009 12:33 AM

09-28-2020, 02:09 PM	#2 (permalink)
Randomizer23 Base Member Join Date: Jul 2020 Location: Ontario Posts: 89 Drives: 09 370Z GM MAN Rep Power: 4	wow 373 views no replies lol.... does no one know anything abt this subject am i posting in the wrong spot?

03-20-2022, 06:39 AM	#14 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	Mazworx long block stage 3 motor is only $15K opposed to Soho HB $20K. Is the extra $5K soho hb worth it over the Mazworx?

03-20-2022, 03:19 PM	#15 (permalink)
VHRpurr Base Member Join Date: Dec 2019 Location: Northlake, TX Posts: 75 Drives: 16 NISMO 370Z M6 Rep Power: 5	AAM has shortblocks and longblocks. Although, I’d go Mazworx.