Experiences with Zspeed 6 puck

Martijn_b · 09-15-2019, 02:04 PM

Hi guys,

I have found the limit of my ZSpeed stage 2 clutch kit around 12-13 psi of boost on my twin turbo setup. I knew this was coming, it was my own gamble. The clutch is rated 450 engine tq and i must be running a bit more than that now.

My options are (incl shipping to Europe):

- Stage 3 clutch $+-850
- Change to a 6 puck disc $200

As you can see, quite a price difference. So i am looking for experiences with the zspeed 6 puck. Anyone can share? Especially the "pedal feel" and on/off feeling.

I dont daily the car and find a little bit of judder/on-off acceptable. But i dont want to have to rev to 3000rpm in order to be able to leave a traffic light..

Hotrodz · 09-15-2019, 02:11 PM

I am not familiar with the Zspeed 6 puck but I do run a SpecialtyZ 6 puck and it has been awesome at 600whp plus.

Sent from my SM-G965U using Tapatalk

soill370z · 09-15-2019, 02:25 PM

I have the z speed stage 4+ 6 puck and sb billet steel flywheel with c mak, clutch feels pretty decent im running oem pedal with the spring mod

sirnixalot · 09-15-2019, 02:52 PM

You will gain more to capacity changing friction material with the same pressure plate. If you want to get a GENERAL idea ACT rates their HD organic clutch a 448tq and their HD 6 puck at 574tq.

Martijn_b · 09-16-2019, 06:09 PM

I contacted Joe and will install a sprung ACT 6 puck. Will report back :-)

Martijn_b · 10-01-2019, 05:34 PM

Received today. Installing next week Wednesday..

Sent from my SM-G973F using Tapatalk

Martijn_b · 10-18-2019, 10:05 AM

Okay, just wanna report back for future readers:

The 6 puck deffinately has a much smaller engagement window. It's fine for a project car, I wouldnt like to use this on the daily. However, it's not that hard to get the car moving but it just requires a bit more feel.

I'm using this setup because I didnt want to upgrade my entire clutch and have chosen the budget option by swapping from full face to 6 puck disc. Starting out fresh I would pick the south bend stage 3 that Zspeed sells over this (easy street+6puck) every day.

Sent from my SM-G973F using Tapatalk

Elmo370z · 10-18-2019, 06:45 PM

Quote:

Originally Posted by Martijn_b

Hi guys,

I have found the limit of my ZSpeed stage 2 clutch kit around 12-13 psi of boost on my twin turbo setup. I knew this was coming, it was my own gamble. The clutch is rated 450 engine tq and i must be running a bit more than that now.

My options are (incl shipping to Europe):

- Stage 3 clutch $+-850
- Change to a 6 puck disc $200

As you can see, quite a price difference. So i am looking for experiences with the zspeed 6 puck. Anyone can share? Especially the "pedal feel" and on/off feeling.

I dont daily the car and find a little bit of judder/on-off acceptable. But i dont want to have to rev to 3000rpm in order to be able to leave a traffic light..

Don’t quote but Seb’s 5 orv6 puck is holding 900+whp

Hotrodz · 10-18-2019, 06:59 PM

Quote:

Originally Posted by Elmo370z

Don’t quote but Seb’s 5 orv6 puck is holding 900+whp

His 5 puck but someone is selling one because they said it was starting to slip for them at 800 whp. I will see when I upgrade my 6 to his 5.

Sent from my SM-G965U using Tapatalk

redondoaveb · 10-18-2019, 07:04 PM

Quote:

Originally Posted by Martijn_b

Okay, just wanna report back for future readers:

The 6 puck deffinately has a much smaller engagement window. It's fine for a project car, I wouldnt like to use this on the daily. However, it's not that hard to get the car moving but it just requires a bit more feel.

I'm using this setup because I didnt want to upgrade my entire clutch and have chosen the budget option by swapping from full face to 6 puck disc. Starting out fresh I would pick the south bend stage 3 that Zspeed sells over this (easy street+6puck) every day.

Sent from my SM-G973F using Tapatalk

I had the ACT 6 puck (stage 4) on my car as a daily and hated it. It worked great once you were moving or launching hard but for a daily in traffic forget it. I just had a Southbend Stage 3 installed but I have a feeling it's not going to hold up to the power my car makes 658whp/491wtq. I'll probably end up with an OS Gilen twin disc.

Quicksilvers · 10-19-2019, 08:45 AM

Ran a Competition Clutch Stage 4 6 puck ceramic clutch and Competition Clutch forge steel flywheel from AAM for five years. The 6 puck design Z enthusiasts have to get used to as far as drivability. At the track this clutch set up was solid held the power efficiently and shifts were very positive. For street duty the 6 puck design honesty leaves a lot to be desired in terms of overall drivability. At the track the flywheel ended up getting damaged from all the hard launches and power shifting or this set up would have kept going. Flywheel replacement was inevitable although the clutch could have been reused very reliable/dependable design clutch for Z enthusiasts putting down a lot of whp and wtq or track the heck out of their Z.

09-15-2019, 02:04 PM	#1 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Experiences with Zspeed 6 puck Hi guys, I have found the limit of my ZSpeed stage 2 clutch kit around 12-13 psi of boost on my twin turbo setup. I knew this was coming, it was my own gamble. The clutch is rated 450 engine tq and i must be running a bit more than that now. My options are (incl shipping to Europe): - Stage 3 clutch $+-850 - Change to a 6 puck disc $200 As you can see, quite a price difference. So i am looking for experiences with the zspeed 6 puck. Anyone can share? Especially the "pedal feel" and on/off feeling. I dont daily the car and find a little bit of judder/on-off acceptable. But i dont want to have to rev to 3000rpm in order to be able to leave a traffic light.. Hotrodz likes this. __________________ Instagram: Boosted_Fairlady

09-15-2019, 02:11 PM	#2 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I am not familiar with the Zspeed 6 puck but I do run a SpecialtyZ 6 puck and it has been awesome at 600whp plus. Sent from my SM-G965U using Tapatalk Martijn_b likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-15-2019, 02:25 PM	#3 (permalink)
soill370z Base Member Join Date: Mar 2015 Location: illinois Posts: 134 Drives: 13 nismo 370z Rep Power: 11	I have the z speed stage 4+ 6 puck and sb billet steel flywheel with c mak, clutch feels pretty decent im running oem pedal with the spring mod Martijn_b likes this.

09-15-2019, 02:52 PM	#4 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	You will gain more to capacity changing friction material with the same pressure plate. If you want to get a GENERAL idea ACT rates their HD organic clutch a 448tq and their HD 6 puck at 574tq. Martijn_b likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

09-16-2019, 06:09 PM	#5 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	I contacted Joe and will install a sprung ACT 6 puck. Will report back :-) JARblue and Hotrodz like this. __________________ Instagram: Boosted_Fairlady

10-01-2019, 05:34 PM	#6 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Received today. Installing next week Wednesday.. Sent from my SM-G973F using Tapatalk Joe@ZSpeed, Hotrodz, madwi and 2 others like this. __________________ Instagram: Boosted_Fairlady

10-18-2019, 10:05 AM	#7 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Okay, just wanna report back for future readers: The 6 puck deffinately has a much smaller engagement window. It's fine for a project car, I wouldnt like to use this on the daily. However, it's not that hard to get the car moving but it just requires a bit more feel. I'm using this setup because I didnt want to upgrade my entire clutch and have chosen the budget option by swapping from full face to 6 puck disc. Starting out fresh I would pick the south bend stage 3 that Zspeed sells over this (easy street+6puck) every day. Sent from my SM-G973F using Tapatalk Hotrodz, redondoaveb and Bswanny like this. __________________ Instagram: Boosted_Fairlady

10-19-2019, 08:45 AM	#11 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,038 Drives: 2017 370z Rep Power: 25464	Ran a Competition Clutch Stage 4 6 puck ceramic clutch and Competition Clutch forge steel flywheel from AAM for five years. The 6 puck design Z enthusiasts have to get used to as far as drivability. At the track this clutch set up was solid held the power efficiently and shifts were very positive. For street duty the 6 puck design honesty leaves a lot to be desired in terms of overall drivability. At the track the flywheel ended up getting damaged from all the hard launches and power shifting or this set up would have kept going. Flywheel replacement was inevitable although the clutch could have been reused very reliable/dependable design clutch for Z enthusiasts putting down a lot of whp and wtq or track the heck out of their Z. __________________ Mr. Clean

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] FS act 6 puck and act Flywheel BNIB	bm37Oz	Parts for sale (Private Classifieds)	9	01-28-2018 08:11 PM
[FOR SALE] ACT 6 Puck Unsprung; JWT Flywheel; ZSpeed CSC	rippedforce85	Parts for sale (Private Classifieds)	10	03-28-2015 02:48 AM
6 puck on the street?	GaleForce	Forced Induction	29	10-23-2013 08:01 AM