|
Yes, As you are installing the trans, you should check that the convertor is not bound up. The converter should rotate freely by hand (or with a screwdriver thru the
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-31-2019, 10:18 AM
|
#7 (permalink) |
|
Track Member
Join Date: Oct 2016
Location: OKC
Posts: 822
Drives: 2010 touring
Rep Power: 7843   |
Yes,
As you are installing the trans, you should check that the convertor is not bound up. The converter should rotate freely by hand (or with a screwdriver thru the window) even when the trans is bolted to the block, before the converter bolts are installed. If the converter wont rotate freely, drop the trans down and determine why. 9/10 times the converter is not seated fully in the pump. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 7A trans noise at idle? Flex plate? | AstatenateZ | Engine & Drivetrain | 11 | 07-15-2019 03:56 PM |
| [FOR SALE] CHEAP FI 7AT flex plate | DEpointfive0 | Parts for sale (Private Classifieds) | 6 | 09-14-2017 08:59 AM |
| CNC 7AT Flex Plate | andy_meng1024 | Engine & Drivetrain | 102 | 07-28-2017 06:34 PM |
| Removed Front License Plate | Troyz | Exterior & Interior | 4 | 04-11-2013 12:03 PM |
| Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401 | DetailersDomain | Detailing / Washing / Waxing / Cosmetic Maintenance and Repair | 3 | 02-21-2011 07:38 AM |
13Likes
Threaded Mode
