My Nismo GT-Pro Full built diff, + Z1 diff cover + diff cooling

Rusty · 07-10-2019, 12:46 AM

You should drill and tap the hole for the temp sensor before installing the diff cover. This way you don't get any chips floating around inside the diff.

Also on your lube return line to the diff. If you are using the top hole in the cover. You have to use a banjo fitting to have enough room for the wheel sensor. The elbow fitting is in the same space as the wheel sensor.

You should use AN 8 fittings and hose. The best pump is a Tilton continuous use pump.

Everything you been doing. I've done it.

You should read my build thread.

Rusty's Nismo Journal

Here's my diff cooler install thread.

MA Motorsports Diff Cooler Install

I installed an OS Giken diff when I did the diff cooler.

I installed the SPL solid diff bushing. No change in noise or vibs. Now when you change out the sub-frame frame bushings. It does increase. Because racecar.

07-10-2019, 12:46 AM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,393 Drives: 2011 Nismo GM 6M Rep Power: 2684438	You should drill and tap the hole for the temp sensor before installing the diff cover. This way you don't get any chips floating around inside the diff. Also on your lube return line to the diff. If you are using the top hole in the cover. You have to use a banjo fitting to have enough room for the wheel sensor. The elbow fitting is in the same space as the wheel sensor. You should use AN 8 fittings and hose. The best pump is a Tilton continuous use pump. Everything you been doing. I've done it. You should read my build thread. Rusty's Nismo Journal Here's my diff cooler install thread. MA Motorsports Diff Cooler Install I installed an OS Giken diff when I did the diff cooler. I installed the SPL solid diff bushing. No change in noise or vibs. Now when you change out the sub-frame frame bushings. It does increase. Because racecar. Elmo370z, elhombre and ZontheRocks like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 07-10-2019 at 12:49 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Z1 brand new diff, trans, diff poly mounts	Elmo370z	Parts for sale (Private Classifieds)	6	02-19-2019 05:34 PM
[FOR SALE] NEW! Quaife Diff QDF11L, Bearings, bushing, bolts, oil, finned diff cover...	kdrshocker	Parts for sale (Private Classifieds)	14	11-01-2018 11:07 PM
[FOR SALE] OEM VLSD diff and diff cover	FireDan50	Parts for sale (Private Classifieds)	6	05-09-2015 03:03 PM
[FOR SALE] Nismo 370z diff with 4.08 gears and nismo finned diff cover	MrVQHR	Parts for sale (Private Classifieds)	3	07-16-2012 09:05 PM
Z34/370Z air-cooling fin equipped diff. rear cover	AK370Z	Engine & Drivetrain	2	04-13-2009 10:35 AM