|
If you want to troubleshoot the ignition coils, you will need to scope the current of each ignition coil on the primary (low voltage side) typically the coil ground. When
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-25-2020, 12:01 PM
|
#18 (permalink) |
|
Base Member
Join Date: Jan 2016
Location: Ontario
Posts: 232
Drives: G37 Sport
Rep Power: 6722   |
If you want to troubleshoot the ignition coils, you will need to scope the current of each ignition coil on the primary (low voltage side) typically the coil ground.
When you look at all 6 waveforms, you will quickly find out which one is different and that is the bad one. If haven't used a scope or don't have access to one, then you might want to take it in to a good shop. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Multiple Cylinder Misfire P0300 | dreamer27 | Engine & Drivetrain | 36 | 02-27-2020 01:23 PM |
| Cylinder 5 Misfire | elhombre | Engine & Drivetrain | 2 | 10-08-2017 12:58 PM |
| Under power and cylinder 5 misfire | Rob298mx | Forced Induction | 1 | 06-30-2016 06:37 AM |
| Check Engine Light Error Code P0300 multiple cylinder misfire. | reynald3616 | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 4 | 12-15-2015 06:17 AM |
| Random Cylinder Misfire with CAI/Short Ram Intake | foodgoesNryan | Intake/Exhaust | 4 | 12-10-2014 12:05 PM |
10Likes
Threaded Mode
