CSC and realease bearing education

ZoomZ · 10-02-2018, 09:57 PM

Can the release bearing be replaced apart from CSC?

Or do you replace the whole thing as a unit?

Spooler · 10-02-2018, 10:19 PM

You replace the whole thing as a unit.

ZoomZ · 10-03-2018, 01:15 PM

Quote:

Originally Posted by Spooler

You replace the whole thing as a unit.

I thought so. Dealer was confusing me.

emaurey · 10-03-2018, 01:38 PM

I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up.

gomer_110 · 10-03-2018, 05:51 PM

Quote:

Originally Posted by emaurey

I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up.

fixed

Spooler · 10-03-2018, 07:13 PM

Quote:

Originally Posted by emaurey

I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up.

Or you can buy an ATS twin disk clutch that will come with an external Nissan slave upgrade.

ZoomZ · 10-05-2018, 11:13 AM

Quote:

Originally Posted by emaurey

I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up.

Understood and thanks. This was a Warranty job. It wasn't the classic CSC failure per say, but a whining noise emitting from the area.

They also replaced the pilot bushing. I will monitor and see if noise is caused by something else.

This is a 2017 Nismo with 21K Km's. Transmission seems fine and they don't think it was the culprit. Changed oil in it anyway. No metal or ugly fluid.

Once out of warranty, I will do CMAK and clutch/flywheel upgrade. They can change as many CSC as they want under warranty. LOL

gomer_110 · 10-05-2018, 02:35 PM

Quote:

Originally Posted by ZoomZ

Understood and thanks. This was a Warranty job. It wasn't the classic CSC failure per say, but a whining noise emitting from the area.

They also replaced the pilot bushing. I will monitor and see if noise is caused by something else.

This is a 2017 Nismo with 21K Km's. Transmission seems fine and they don't think it was the culprit. Changed oil in it anyway. No metal or ugly fluid.

Once out of warranty, I will do CMAK and clutch/flywheel upgrade. They can change as many CSC as they want under warranty. LOL

Just don't forget this logic when you get stranded somewhere when your CSC fails when you least suspect it.

ZoomZ · 10-12-2018, 11:00 AM

Quote:

Originally Posted by gomer_110

Just don't forget this logic when you get stranded somewhere when your CSC fails when you least suspect it.

Thanks. I don't think it will fail, but if it does, I will be the one to blame.

I fully understand that.

I think by the time I put on another 20k km's, it will be out of warranty and I will go ahead with conversion.

Bswanny · 10-18-2018, 11:58 AM

Quote:

Originally Posted by emaurey

I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up.

Did you change it out yourself or have a shop do it?

Quicksilvers · 10-23-2018, 08:56 AM

It is inevitable it will fail the question is when will it than will it fail. Definitely replace the whole unit or better yet delete it. The Z Speed Performance CMAK would be my first choice on the list though.

10-02-2018, 09:57 PM	#1 (permalink)
ZoomZ Track Member Join Date: Jan 2017 Location: Vancouver, BC Posts: 714 Drives: 17' 370Z Nismo Rep Power: 40312	CSC and realease bearing education Can the release bearing be replaced apart from CSC? Or do you replace the whole thing as a unit?

10-02-2018, 10:19 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	You replace the whole thing as a unit. ZoomZ likes this.

10-03-2018, 01:38 PM	#4 (permalink)
emaurey Base Member Join Date: Sep 2018 Location: GA Posts: 9 Drives: 2009 370Z 6MT Rep Power: 6	I would recommend not replacing the CSC, but delete it with the ZSpeed or Z1 kits. I went through 2 of them before 55k miles before I wised up. gomer_110, wideglideleon and ZoomZ like this.

10-23-2018, 08:56 AM	#11 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25462	It is inevitable it will fail the question is when will it than will it fail. Definitely replace the whole unit or better yet delete it. The Z Speed Performance CMAK would be my first choice on the list though. ZoomZ likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Track Driver Education Classes or Club Suggestions?	oldSchool33	Track / Autocross / Drifting / Dragstrip	23	01-17-2017 04:46 AM
Stocks Investing MONEY : Education?!! Pinkys : OTC	tibal	The Lounge (Off Topic)	417	12-10-2015 03:32 PM
Need Some Education: Toe Arms Vs Traction Arms	MadChemist	Brakes & Suspension	18	06-18-2014 04:19 AM
Hub&Bearing	dimitarm	Wheels & Tires	0	08-16-2013 12:35 PM