The "Other" oil temps we don't know...

MotorvateDIY · 08-31-2019, 07:04 PM

Hey Everyone,
I just wanted to share some "behind the scenes" work being done at MotorvateDIY Garage.
I have often wanted to know how hot does the manual transmission oil get... AND how hot does the differential oil get..

Well...Now I can monitor manual transmission oil temperature AND differential oil temp AND data log them with the current time to a SD card.

Rear Differential Oil Temperature Sensor:

Manual Transmission Oil Temperature Sensor:

Motorvate Designed & Built (Arduino Uno based) differential and manual transmission oil temperature display with max temp and data logging to SD card. (oTemp is outside temperature)

Why bother doing this?
Well, I wanted to see how much these oil temperatures increase during:
• A long highway drive
• Driving in traffic
• Drag racing
• A few pulls on the dyno
• A track day (HPDE)
ALSO...
Will the temperatures change when I put in fresh RedLine 75W90? The differential currently has 3 year old non-synthetic Nissan 80W90 differential oil.

Drag racing is scheduled for next week. The HPDE is booked for October.

All the results will be shown in a future episode of Motorvate's DIY Garage:
https://www.youtube.com/motorvateDIY

Rusty · 08-31-2019, 08:12 PM

When I did my diff up-grade. An OS Giken diff, Z1 diff cover, SPL diff bushing, MA Motorsprts diff cooler. I installed a SpeedHut Diff temp gauge.

MA Motorsports Diff Cooler Install

It takes about 10 miles of driving to start to see the diff temp gauge moving up. Driving 9 hours at 80 mph to ZDayZ. The highest temp I seen was 260F. Trackday was 270F. I can turn on the diff cooler and drop my diff temps below 200F after about 10 minutes.

Can't wait to see what you get for the tranny temps. I thought about installing a tranny temp gauge.

BettyZ · 08-31-2019, 09:40 PM

Welp. I might as well buy a diff cooler now, bc as soon as this data comes out I'm gonna be all "must be colder.'

Sent from my SM-G955U using Tapatalk

08-31-2019, 08:12 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,867 Drives: 2011 Nismo GM 6M Rep Power: 2684436	When I did my diff up-grade. An OS Giken diff, Z1 diff cover, SPL diff bushing, MA Motorsprts diff cooler. I installed a SpeedHut Diff temp gauge. MA Motorsports Diff Cooler Install It takes about 10 miles of driving to start to see the diff temp gauge moving up. Driving 9 hours at 80 mph to ZDayZ. The highest temp I seen was 260F. Trackday was 270F. I can turn on the diff cooler and drop my diff temps below 200F after about 10 minutes. Can't wait to see what you get for the tranny temps. I thought about installing a tranny temp gauge. BettyZ likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-31-2019, 09:40 PM	#3 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Welp. I might as well buy a diff cooler now, bc as soon as this data comes out I'm gonna be all "must be colder.' Sent from my SM-G955U using Tapatalk Rusty likes this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New to the "Z" world.. Is a "Sprint Booster" worth it??	newls196	Engine & Drivetrain	29	03-07-2016 10:21 AM
I guess this will be my "build thread" or..."journal?"... atx370z	atx370z	Member's 370Z Gallery	15	09-15-2010 12:10 PM
"Dancing with the Dealer" with the 40th - hope to be in the "New Owner" section soon	optiontrader	New Forum Member	8	08-03-2010 11:37 PM
"Warning" Carbon Fiber Z emblems "DO NOT FIT"	NXTAZEE	Exterior & Interior	2	12-20-2009 03:49 AM
Break in - drive it "hard" or "be gentle"?	kannibul	Engine & Drivetrain	3	06-06-2009 01:51 AM