Gtr cams on VHR head

Elmo370z · 10-13-2017, 11:21 PM

So one of our found members here has a set maybe he instal maybe he not.

Elmo370z · 10-13-2017, 11:22 PM

I believe they are tomei 282 with a 11.5mm lift with dual titanium springs rated for 12,000 Rpms.

Rusty · 10-15-2017, 02:46 AM

You thinking on doing a head conversion?

jchammond · 10-15-2017, 04:57 AM

Unsure if the VQ37VHR would accept cams on intake & exhaust...the VVEL is working well on the intake side.
The newest release of exhaust cams are out & put up some pretty good numbers.....I’d really like to see a few different installs & pulls on a Dynojet. The advertising gains,were on a Z w/Long tubes & CAI.

Sent from my iPhone using Tapatalk

Elmo370z · 10-15-2017, 08:42 AM

Quote:

Originally Posted by Rusty

You thinking on doing a head conversion?

No not me. I have the c2 cams. These are ssfirehawks heads. He is going to get them shipped off and tested.

B&W_Evader · 10-16-2017, 09:18 AM

So were the long tube headers and CAI installed at the same time as the cams?

jchammond · 10-16-2017, 11:12 AM

Quote:

Originally Posted by B&W_Evader

So were the long tube headers and CAI installed at the same time as the cams?

No, test car was pre-dyno’d with long tubes & CAI & Post Dyno after exhaust cams only.

10-15-2017, 02:46 AM	#3 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,568 Drives: 2011 Nismo GM 6M Rep Power: 2684440	You thinking on doing a head conversion? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

10-15-2017, 04:57 AM	#4 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 59 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684396	Unsure if the VQ37VHR would accept cams on intake & exhaust...the VVEL is working well on the intake side. The newest release of exhaust cams are out & put up some pretty good numbers.....I’d really like to see a few different installs & pulls on a Dynojet. The advertising gains,were on a Z w/Long tubes & CAI. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

10-16-2017, 09:18 AM	#6 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 388	So were the long tube headers and CAI installed at the same time as the cams? __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! Cams, heads, boost and a million questions in my head	SS_Firehawk	Engine & Drivetrain	21	01-28-2017 01:16 PM
Where to buy jun cams	Elmo370z	Engine & Drivetrain	0	06-13-2015 01:26 AM
cams for 370	jlask370	Engine & Drivetrain	5	05-08-2013 05:23 PM
Nissan 240 Gold Plated Head/Cams	Equinox	Engine & Drivetrain	11	07-09-2010 08:36 PM
Head-to-head pics: 05 350Z vs 370Z	xDIEGOx	Nissan 370Z Photos / Spyshots / Video / Media Gallery	12	01-02-2009 04:58 AM

10-13-2017, 11:22 PM	#2 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,730 Drives: 09 nissan 370z Sp M6 Rep Power: 295380	I believe they are tomei 282 with a 11.5mm lift with dual titanium springs rated for 12,000 Rpms.