Csc issues while bleeding

Originally Posted by Joe@ZSpeed You should also check that you have the correct clutch and flywheel in the car, If it is aftermarket it may be the incorrect height for

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain
Csc issues while bleeding

5Likes

1 Post By JARblue
4 Post By Joe@ZSpeed

LinkBack

Thread Tools

Display Modes

09-09-2017, 07:56 PM

#7 (permalink)

Alberto370z

Base Member

Join Date: Jul 2017

Location: CA

Posts: 4

Drives: 2011 370z sport ed

Rep Power: 9

Quote:

Originally Posted by Joe@ZSpeed

You should also check that you have the correct clutch and flywheel in the car, If it is aftermarket it may be the incorrect height for a standard replacement slave cylinder.

Some companies make set-ups that are at different stack heights, IE OS Giken, SpecialtyZ etc. If you try to use a standard size slave it may over-extend it and blow out immediately.

This was the issue with mine.. thanks for the reply everyone.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bleeding CMC	ARrado15	Engine & Drivetrain	2	04-25-2016 12:43 PM
Clutch bleeding BIG issues	edconline	Engine & Drivetrain	16	04-10-2014 08:00 AM
Problem with Brake Bleeding	Read T	Brakes & Suspension	3	12-08-2013 04:32 PM
Goodridge SS Brake line Upgrade: Flush/Bleeding Issues	JSBZ	Brakes & Suspension	22	10-25-2012 12:32 AM
Brake bleeding sequence	fastguy9r	DIY Section (Do-It-Yourself)	3	07-04-2012 09:22 AM

All times are GMT -5. The time now is 05:37 AM.