|
One other thing you can check... Lift up the rear and look at your half shafts. Make sure the sprocket for your half shaft sensors isn't caked with crud. They
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
02-13-2017, 09:31 AM
|
#27 (permalink) |
|
Track Member
Join Date: Aug 2011
Location: CA
Posts: 972
Drives: slower than before
Rep Power: 388   |
One other thing you can check... Lift up the rear and look at your half shafts. Make sure the sprocket for your half shaft sensors isn't caked with crud. They can be dirty, but should not have any chunks of crud on them. These sensors tell the computer how fast each shaft is spinning if the difference is too great, it will apply brakes to the one that's spinning too fast.
__________________
|RIP|6spd-sport|OSG-LSD|XP8|RBF600|Eibach Sways|RE-71R|FI-34Row|Gen3-CAI|Yaw P.S.| |
|
|
| Bookmarks |
|
|
10Likes
Threaded Mode
