|
Contact cleaner. Visual inspect female terminals (even better to do a drag test if you can find the male terminal somewhere), dielectric grease to prevent further issues. Back probe to
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
06-07-2016, 12:10 AM
|
#8 (permalink) |
|
Track Member
Join Date: Mar 2016
Location: San jose
Posts: 854
Drives: 2013 370z sport
Rep Power: 3385   |
Contact cleaner. Visual inspect female terminals (even better to do a drag test if you can find the male terminal somewhere), dielectric grease to prevent further issues. Back probe to check for 5v ref at MAF, back probe for ground, back probe on sig and check/record the voltage in histograph looking for any drop outs, also check freeze data from code set to see what values were vs MAF 1 when code set.
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370z manny transmission a fail? | ubs234 | Engine & Drivetrain | 31 | 10-14-2013 09:21 PM |
| 09 370z stillen gen 3 error code P0300???? | 1littlekerr | Tuning | 12 | 07-10-2013 05:50 PM |
| Error Code P0605 Internal Control Module Read Only Memory (ROM) Error | Fearless_Z | Tuning | 3 | 02-10-2013 07:35 AM |
| School me on Fail-Safe mode | osbornsm | Nissan 370Z General Discussions | 12 | 08-27-2011 08:36 AM |
| Has anyone with the AT gone into "fail-safe mode"? | Lee123 | Engine & Drivetrain | 6 | 08-23-2010 03:15 PM |
1Likes
Threaded Mode
