04-02-2016, 02:39 PM
|
#1 (permalink)
|
|
Base Member
Join Date: Nov 2015
Location: Los Angeles
Posts: 95
Drives: 09 Nissan 370Z MNT6
Rep Power: 11
|
Quote:
Originally Posted by Joe@ZSpeed
If you reused the stock flywheel it cannot be resurfaced. That can cause some judder on take off since you are putting a new clutch on a used surface, More miles will some times help smooth it out.
If the pedal is changing engagement points they probably don't have it bled right or the master cylinder is failing and causing it, We always recommend a new master when the slave or clutch is changed. Keeps this from happening after the work is completed. A lot of times when you open this hydraulic system the original clutch master no longer want's to work correctly.
|
My mechanic also got me a new OEM master cylinder as well. I had no clue about the fly wheel, if I did I would've purchased a new one
Also I don't think my clutch was adjusted correctly because it's engaging a lot higher than before
Thanks for all the help
Last edited by King_Ch1cas; 04-02-2016 at 02:43 PM.
|
|
|
Similar Threads
14Likes
Hybrid Mode
