F.I. oil cooler

RBfastback · 01-07-2016, 11:42 AM

Quote:

Originally Posted by Rusty

In the picture. I have my oil lines routed in front of the filters, on top of the white foam bumper. Then they run down the side to the plate. They do not go under the sway bar.

that's how mine run too:

Rusty · 01-07-2016, 11:47 AM

Quote:

Originally Posted by RBfastback

that's how mine run too:

You have your lines going under the washer. Mine go over the top of it.

Spooler · 01-07-2016, 09:38 PM

Quote:

Originally Posted by RBfastback

that's how mine run too:

Mine are ran just like this picture.

RBfastback · 01-07-2016, 09:44 PM

Quote:

Originally Posted by Spooler

Mine are ran just like this picture.

is urs the FI kit and if it is are your oil lines able to both make it over the sway bar? or 1 over 1 under

Spooler · 01-08-2016, 10:24 AM

Quote:

Originally Posted by RBfastback

is urs the FI kit and if it is are your oil lines able to both make it over the sway bar? or 1 over 1 under

Yes, I have the FI kit. Both of my lines go over the swaybar.

RBfastback · 01-08-2016, 10:30 AM

Quote:

Originally Posted by Spooler

Yes, I have the FI kit. Both of my lines go over the swaybar.

I'll have to fix that next oil change...
thanks

Rusty · 01-07-2016, 09:48 PM

Quote:

Originally Posted by Spooler

Mine are ran just like this picture.

So..................how many 6 packs did you drink?

Spooler · 01-08-2016, 08:56 AM

Quote:

Originally Posted by Rusty

So..................how many 6 packs did you drink?

None....LOL Moutain Dew + Marlboro's = Yes

Elmo370z · 01-07-2016, 10:35 PM

Quote:

Originally Posted by Spooler

Mine are ran just like this picture.

WHere the lines go under the windshield fluid did you have trouble with the lines bulging out a little?

Spooler · 01-08-2016, 08:58 AM

Quote:

Originally Posted by Elmo370z

WHere the lines go under the windshield fluid did you have trouble with the lines bulging out a little?

Yes, a little. The only place I had an issue was running past the factory PS fluid cooler brackets. I put some rubber lines around the braided lines to protect them.

Elmo370z · 01-08-2016, 10:51 AM

Quote:

Originally Posted by Spooler

Yes, a little. The only place I had an issue was running past the factory PS fluid cooler brackets. I put some rubber lines around the braided lines to protect them.

Thanks.,

jwick · 02-06-2016, 09:21 AM

Quote:

Originally Posted by RBfastback

that's how mine run too:

Do you run those nets over your filters all the time?

RBfastback · 02-06-2016, 01:22 PM

Quote:

Originally Posted by jwick

Do you run those nets over your filters all the time?

Ive had em on about 5-7k miles now, I honestly wouldn't know if they are any good or bad but I know there waterproof and it keeps bugs from sticking in between the filter creases.
easy to clean off too

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
DIY: Oil cooler and radiator spray cooler with video	AnthonyD1978	Track / Autocross / Drifting / Dragstrip	24	08-14-2015 09:55 AM
Nissan Motorsports Oil Cooler vs. Stillen Oil Cooler	Dustin@Z1	Engine & Drivetrain	158	03-10-2014 02:27 PM
7AT 4.08 Gear swap QUAIFE LSD Trans cooler diff cooler	matcop	Engine & Drivetrain	17	09-07-2013 10:09 AM
[FOR SALE] AT Transmission Cooler with Setrab 19 Row cooler	zakimak	Parts for sale (Private Classifieds)	4	03-03-2012 11:44 AM