Flex fuel kit

03specvvictor · 12-05-2015, 10:22 PM

we can extend or shorten the harness to mount the unit elsewhere so you can choose locations like the top of the tank or the engine compartment.

MAMotorsports · 12-07-2015, 09:01 AM

So the plan is to Hijack the MAF signal to run the FlexFuel sensor?

03specvvictor · 12-09-2015, 09:44 AM

Yes, that is the plan with the Ecutek software, I'm knocking off both maf sensor using one to signal the flex fuel and the secondary to signal the Aem wide band.

RBfastback · 12-10-2015, 02:18 AM

yes extremely interested

Viktoriia · 03-24-2017, 09:59 PM

Bump ?

Stillen · 05-08-2017, 04:30 PM

I cut my no problem, I did this my self to put my E85 innovate gauge.

Viktoriia · 05-09-2017, 11:18 AM

More info

ihiryu · 05-09-2017, 02:23 PM

I'm actually in the works with Fuel-It for making a flex fuel setup. My kit is currently installed and still in the middle of testing. Attempting to make it as PNP as possible. My kit has been installed for about 2 weeks now, just been slowly tuning it.

Currently running returnless as well still!

phunk · 05-09-2017, 10:15 PM

Its insanely easy. The fuel line plugs right into the sensor. All you need to do is make a 8-12" hose that plugs from the sensor to the fuel pump.

ihiryu · 05-10-2017, 11:25 AM

Quote:

Originally Posted by phunk

Its insanely easy. The fuel line plugs right into the sensor. All you need to do is make a 8-12" hose that plugs from the sensor to the fuel pump.

Go away! You don't need flex fuel in chicago

Viktoriia · 06-13-2017, 05:34 PM

Quote:

Originally Posted by ihiryu

Go away! You don't need flex fuel in chicago

bumpppppp

phunk · 07-12-2017, 08:43 PM

behold

gbrettin · 07-12-2017, 08:54 PM

Quote:

Originally Posted by phunk

behold

Simple solution. I like it.

Sent from my SM-G930P using Tapatalk

Jayhovah · 07-12-2017, 08:54 PM

Quote:

Originally Posted by phunk

behold

That is hot.

Jayhovah · 07-12-2017, 08:55 PM

So how does this sensor get wired in?

12-05-2015, 10:22 PM	#16 (permalink)
03specvvictor Base Member Join Date: Sep 2014 Location: Miami Posts: 25 Drives: 370z,350z Rep Power: 10	we can extend or shorten the harness to mount the unit elsewhere so you can choose locations like the top of the tank or the engine compartment. Last edited by 03specvvictor; 12-06-2015 at 07:23 AM.

12-07-2015, 09:01 AM	#17 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 16	So the plan is to Hijack the MAF signal to run the FlexFuel sensor? __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828

12-09-2015, 09:44 AM	#18 (permalink)
03specvvictor Base Member Join Date: Sep 2014 Location: Miami Posts: 25 Drives: 370z,350z Rep Power: 10	Yes, that is the plan with the Ecutek software, I'm knocking off both maf sensor using one to signal the flex fuel and the secondary to signal the Aem wide band. hooey_b likes this.

03-24-2017, 09:59 PM	#20 (permalink)
Viktoriia Base Member Join Date: Dec 2014 Location: Houston, TX Age: 30 Posts: 29 Drives: 09 Nissan 370Z Rep Power: 10	Bump ? gbrettin likes this. __________________ Supercharged by Stillen

05-08-2017, 04:30 PM	#21 (permalink)
Stillen Base Member Join Date: Feb 2017 Location: Florida Posts: 11 Drives: 370z nismo stilllen Rep Power: 8	I cut my no problem, I did this my self to put my E85 innovate gauge. __________________ supercharger 13psi, 928impeller, TopGun A2A, 9lb pulley, walbro 485 pump with 10G wire with relay, FI clutch 5Puck, exhaust 3" innovate Gauges, VVEL deleted, fuel pressure set at 52, Tuned by ZTuner Harry from Bradenton Florida. 495whp on 93 and 585whp on E85.

12-10-2015, 02:18 AM	#19 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	yes extremely interested

05-09-2017, 11:18 AM	#22 (permalink)
Viktoriia Base Member Join Date: Dec 2014 Location: Houston, TX Age: 30 Posts: 29 Drives: 09 Nissan 370Z Rep Power: 10	More info __________________ Supercharged by Stillen

05-09-2017, 02:23 PM	#23 (permalink)
ihiryu Base Member Join Date: Oct 2016 Location: TX Posts: 141 Drives: 2013 Nismo 370z 6MT Rep Power: 33	I'm actually in the works with Fuel-It for making a flex fuel setup. My kit is currently installed and still in the middle of testing. Attempting to make it as PNP as possible. My kit has been installed for about 2 weeks now, just been slowly tuning it. Currently running returnless as well still!

05-09-2017, 10:15 PM	#24 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,654 Drives: 370 Rep Power: 944523	Its insanely easy. The fuel line plugs right into the sensor. All you need to do is make a 8-12" hose that plugs from the sensor to the fuel pump. gbrettin, wideglideleon and ihiryu like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] CJMotorsports 370z fuel starvation elimination kit, fuel pump brand new	cossie1600	Parts for sale (Private Classifieds)	3	12-10-2015 09:43 PM
[FOR SALE] Tein Flex Control Master Type FLEX coilovers - 350Z	laze1	Parts for sale (Private Classifieds)	3	10-18-2012 05:21 AM
Press Release: Flex Tools now has a 4 3/8 backing plate for the Flex XC 3401	DetailersDomain	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	3	02-21-2011 07:38 AM
50-75% improved fuel economy news story... 'supercritical fuel inejctors'	travisjb	Engine & Drivetrain	4	05-21-2010 11:54 AM
Fuel Filler Tube Coating Flaking Off Into Fuel Tank	SoCal 370Z	Nissan 370Z General Discussions	12	02-02-2010 10:37 AM