Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Spooler · 01-04-2019, 11:49 AM

Quote:

Originally Posted by johnnydrama

I will have a repeat of the same mods minus the e85 and injectors, I am staying on 93 octane. It will be installed and tuned by Dynosty in the coming months, don't have a firm date on the calendar yet.

I made 341whp/271wtq with the following list of power or power related mods:

Z1 Intakes
Z1 Plenum Power Mod
Motordyne LTH
Fast Intentions Exhaust
Stillen Lightweight Pulley
Z1 Lightweight Flywheel

The next round will include the following list of upgrades:

Z1 Race Intakes Upgrade (Installed)
Z1 Ported Lower Intake (Installed)
Dewla Dezign Cold Air Intake Guide (Installed)
Z1 2-piece Lightweight Rotors (Installing this weekend)
Jim Wolf C2 Cams (Pending installation and tune at Dynosty)

I was also going to do EPS Big Bore Throttle Bodies but both Z1 and Dynosty have recommended staying away from them due to poor idle quality and reliability issues.

After the tune is done, I will be going back and upgrading the LSD and final drive to 4.08s. At which point my N/A build should be complete... yea right.

I will share with everyone the results of the C2 cams once completed.

How about an exhaust video. I want to see if this car sounds as good as your old one. LOL Your old car was the best sounding 370z ever. That is why I opted for the Carbon Fiber mufflers on my 3" exhaust.

Spooler · 01-04-2019, 12:03 PM

For all that have never heard it before.

johnnydrama · 01-04-2019, 12:14 PM

Quote:

Originally Posted by Spooler

How about an exhaust video. I want to see if this car sounds as good as your old one. LOL Your old car was the best sounding 370z ever. That is why I opted for the Carbon Fiber mufflers on my 3" exhaust.

I have had one in the works for awhile now. Hard to say if mine now is better than in the video. The Motordyne Headers w/ Hemholz resonators produce more of a high pitched exotic noise where the setup in the video was a very deep sound. Also my FI exhaust is non-resonated now as opposed to 18" inch resonators in the video. Below is Dynosty's video on facebook of my setup but doesn't do the setup complete justice.

https://www.facebook.com/Dynosty/vid...5948568420534/

I will try and get a video put together though for my current. The weather is supposed to be nice tomorrow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM

01-04-2019, 12:03 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,153 Drives: 2013 Nismo 370z Rep Power: 2684394	For all that have never heard it before.