Jim Wolf Cam testing for the VQ37VHR -- Results inside!

chuckie311

here is what i have on my list of to dos so far..planning this for April or May of next year

JWT Stage 2 cams
suckerpunch upgraded oil pump

Stage 1 heads from import part pros
Heads inspected and cleaned
Heads redecked
Ported exhaust and intake runners
3 angle valve job
New OEM Valve stem seals installed
Valve Stem Heights set
Cold Clearance set for stock cams
Heads prepped and assembled

+1mm oversized valves

ported lower plenum

change plugs on car

change water pump

inspect timing chain

then a ecutek retune

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

MAMotorsports

Shoot me a PM, would love to chat about the build and see if I could be of any help. We may have some options that would work for what you are looking to do.


-Daelen

__________________
Daelen @ MA Motorsports

MA-Motorsports.com

https://www.facebook.com/pages/MA-Mo...C/125379858828

jrb55gh

The C2 cams should have an incredible midrange charge with the 350 HR plenum. I can't wait to see the dyno. Hope you will do one.

__________________
Ecutek | DIY HR350 upper plenum | DIY ported lower manifold | TurboXS cbe | FI rhfc

chuckie311

while i am doing a before and after dyno its more than just cams i am doing so i wont have any true cam numbers..
this is my list

JWT Stage 2 cams
suckerpunch upgraded oil pump
Urethane Transmission Mount
Urethane Motor Mounts
Ported throttle bodies
ported lower plenum
new spark plugs
new water pump
Wilwood Big Brake Kit, Front & Rear
3 inch intake (AdminTuning)

__________________
Tuned by (Seb@Specialty-Z)
2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears