|
There is a bit of cam hickup at idle but nothing stellar...will pass for stock to the untrained ear. Torque increase is noticeable while driving for sure...especially on the low
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
09-23-2015, 08:43 PM
|
#11 (permalink) |
|
Base Member
Join Date: Apr 2013
Location: Charm city
Posts: 6
Drives: 1995 240sx
Rep Power: 14  |
There is a bit of cam hickup at idle but nothing stellar...will pass for stock to the untrained ear.
Torque increase is noticeable while driving for sure...especially on the low end, if you look at the graph around 3500rpm there is a bump of about 20ft/lbs; as most daily driving is done from 1000-4000rpm its a nice addition. I'd expect gains to be larger with a set of proper headers but the goal of this test was to put them in a 'typical street z' and see what they would do... that being said this car still has factory headers, which are shorties. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| OEM Denso VQ37VHR Fuel injector Flow Test results | MILENKOGT | Engine & Drivetrain | 13 | 08-30-2015 04:52 PM |
| GTM Stage 2 Supercharger Preliminary Testing Results | SAM@GTM | Forced Induction | 576 | 01-15-2014 09:40 PM |
| Uprev Tuned at Z1, results inside :) | '10Anamoly | Tuning | 12 | 01-01-2012 12:32 PM |
| 1/4 mile results inside | ZforMe | Track / Autocross / Drifting / Dragstrip | 32 | 04-24-2009 07:27 AM |
| Knock on the VQ37VHR - gear heads step inside | BerkTech | Intake/Exhaust | 39 | 04-13-2009 10:37 AM |
596Likes
Threaded Mode
