Jim Wolf Cam testing for the VQ37VHR -- Results inside!

synolimit · 02-19-2016, 04:04 PM

Maybe one day for me then.

ban25 · 02-19-2016, 05:36 PM

Quote:

Originally Posted by synolimit

Maybe one day for me then.

I have these cams going into my new engine build. Will post numbers when I have them.

Elmo370z · 02-19-2016, 10:39 PM

Quote:

Originally Posted by MAMotorsports

We have zero issues with shipping cars or engines

If you would like to shoot me a call, would be more than happy to chat! 410-593-7080

We have a shipper that is from out west that has taken care of a few of our customers cars.

What is the cost of the shipper?

BGTV8 · 02-20-2016, 04:18 AM

Quote:

Originally Posted by MAMotorsports

Just based on the dyno graph on the first page compared to the ones available for the JUN cams on similar set ups(Not the built high compression motor). There have also been some issues with the JUN cams idling correctly without having to bump the idle RPM up considerably, not something we like to do on most street applications.

The other huge selling point is state side customer support, I realize this does not have an impact on you. But JWT has been tremendous to work with, and takes very good care of their customers via quick support and a vast knowledge of the VQ platform. JUN is very hard to communicate with here in the US, so its a hard product to support with any questions that need to be answered.

I absolutely agree with your comment about JWT - they are very helpful folks and get back with responses quickly.

MAMotorsports · 02-22-2016, 10:12 AM

Quote:

Originally Posted by Elmo370z

What is the cost of the shipper?

Ill shoot you a PM with his contact info, as I do not know exact prices.

Quote:

Originally Posted by BGTV8

I absolutely agree with your comment about JWT - they are very helpful folks and get back with responses quickly.

Pretty excited about your build, have spoken with them about it a few times!

Elmo370z · 02-22-2016, 11:39 AM

Quote:

Originally Posted by MAMotorsports

Ill shoot you a PM with his contact info, as I do not know exact prices.

Pretty excited about your build, have spoken with them about it a few times!

Sounds good thank you.

Elmo370z · 03-06-2016, 02:17 AM

Quote:

Originally Posted by MAMotorsports

List is $21.63 each(12 needed) so expect around that but a little cheaper normally.

Im on the nissan website trying to find these cam buckets. Could you please navigate me to the part number so i can go to my dealership and purchase these.

MAMotorsports · 03-07-2016, 08:53 AM

Quote:

Originally Posted by Elmo370z

Im on the nissan website trying to find these cam buckets. Could you please navigate me to the part number so i can go to my dealership and purchase these.

The Base part # is 13231-EY00, but you need to measure and get the correct size. We normally just spec them out when we build the heads and order them.

Elmo370z · 03-07-2016, 10:42 AM

Ok gotcha, guess I'll just wait then. Thank you

Elmo370z · 04-10-2016, 05:11 PM

Any updates on the stage 2 cam?

Elmo370z · 04-13-2016, 09:43 PM

bumps

zer099 · 04-14-2016, 12:46 PM

I called JWT and asked about the timeline for stage 2 cams last week and they said (and this is paraphrasing): its set to be looked at later this year but is not something I would hold your breath for to be released within this year. In a nut shell they were very vague and noncommittal to a time-frame, and that's understandable. They said they haven't started development but have plans to do so this year. And that's all understandable as we all know how we get when we are told a date then it takes longer.

What I pulled from the phone call was "if your planing on pulling the engine this year and want cams the ones that are out are the ones you get. If your not committed and want to wait a year, give or take, we 'should' have a stage 2 by then."

Stage 2 is planed to be more aggressive and get the most they can get from the VHR. I asked if it was to be cut with more intention of being a FI cam or for NA and they said they wanted it to benefit both equally and not be bias more towards one than the other when it comes to it.

So... take from that what you will.

MAMotorsports · 04-15-2016, 09:24 AM

Quote:

Originally Posted by zer099

I called JWT and asked about the timeline for stage 2 cams last week and they said (and this is paraphrasing): its set to be looked at later this year but is not something I would hold your breath for to be released within this year. In a nut shell they were very vague and noncommittal to a time-frame, and that's understandable. They said they haven't started development but have plans to do so this year. And that's all understandable as we all know how we get when we are told a date then it takes longer.

What I pulled from the phone call was "if your planing on pulling the engine this year and want cams the ones that are out are the ones you get. If your not committed and want to wait a year, give or take, we 'should' have a stage 2 by then."

Stage 2 is planed to be more aggressive and get the most they can get from the VHR. I asked if it was to be cut with more intention of being a FI cam or for NA and they said they wanted it to benefit both equally and not be bias more towards one than the other when it comes to it.

So... take from that what you will.

Do you know who you spoke with? As some of this info is not correct.

-Daelen

Elmo370z · 04-15-2016, 10:23 AM

Mmmmm darnit. Well ill i don't mind the wait, as my build will occur at some point in time next year. If they don't come out guess ill just go with the bp turbo kit

zer099 · 04-17-2016, 03:51 AM

Quote:

Originally Posted by MAMotorsports

Do you know who you spoke with? As some of this info is not correct.

-Daelen

I don't recall the gentleman's name. A lady answered the phone, I asked to talk to someone about the VQ37VHR cams; I was put on hold and then a guy answered and we conversed for about 20 minutes about them.

Which info is incorrect?

02-19-2016, 04:04 PM	#121 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Maybe one day for me then. __________________ 13 370z-

03-07-2016, 10:42 AM	#129 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Ok gotcha, guess I'll just wait then. Thank you MAMotorsports likes this.

04-10-2016, 05:11 PM	#130 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Any updates on the stage 2 cam? wsarver and imjello like this.

04-13-2016, 09:43 PM	#131 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	bumps wsarver likes this.

04-14-2016, 12:46 PM	#132 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 9	I called JWT and asked about the timeline for stage 2 cams last week and they said (and this is paraphrasing): its set to be looked at later this year but is not something I would hold your breath for to be released within this year. In a nut shell they were very vague and noncommittal to a time-frame, and that's understandable. They said they haven't started development but have plans to do so this year. And that's all understandable as we all know how we get when we are told a date then it takes longer. What I pulled from the phone call was "if your planing on pulling the engine this year and want cams the ones that are out are the ones you get. If your not committed and want to wait a year, give or take, we 'should' have a stage 2 by then." Stage 2 is planed to be more aggressive and get the most they can get from the VHR. I asked if it was to be cut with more intention of being a FI cam or for NA and they said they wanted it to benefit both equally and not be bias more towards one than the other when it comes to it. So... take from that what you will. gbrettin and xxAGAVExx like this.

04-15-2016, 10:23 AM	#134 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Mmmmm darnit. Well ill i don't mind the wait, as my build will occur at some point in time next year. If they don't come out guess ill just go with the bp turbo kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM