AMS Adjustable Short Throw Shifter available @ Z1 Motorsports

Dustin@Z1 · 06-07-2010, 11:34 AM

Yes. The shifter trim panel and shift knob will need to be removed. From there the two rubber shift boots and retaining plate will need to be removed as well.

At that point you will need to disconnect the bolt securing the shifter to the shift arm. Some people can get their hands around it to do the install. But I cannot. I recommend jacking the car up and having it on a lift.

When you get to this point. The shifter should literally "Pop" out since there is a sping beneath the shifter that aids in the reverse gear selection.

Reassembly is the opposite of disassembly.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Short throw shifter rattle	Anthny2040	Engine & Drivetrain	16	05-27-2011 10:07 AM
short throw shifter?	tvfreakazoid	Nissan 370Z General Discussions	6	03-09-2009 04:02 AM
Short throw shifter	KameezGuru	Engine & Drivetrain	8	01-24-2009 08:35 AM

06-07-2010, 11:34 AM	#20 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 20	Yes. The shifter trim panel and shift knob will need to be removed. From there the two rubber shift boots and retaining plate will need to be removed as well. At that point you will need to disconnect the bolt securing the shifter to the shift arm. Some people can get their hands around it to do the install. But I cannot. I recommend jacking the car up and having it on a lift. When you get to this point. The shifter should literally "Pop" out since there is a sping beneath the shifter that aids in the reverse gear selection. Reassembly is the opposite of disassembly.