RJM Clutch Pedal System for 370Z - Fully Customizable Clutch Feel & Stroke

Ryan @ RJM

Hi JLarson,
That is an unusual situation. My best guess at what's happened is the 3 bolts have been over tightened at some point causing them to yield. Once a bolt is over stressed it will stretch and loose its strength/holding power. I would recommend picking up 3 new standard bolts from any local hardware store to replace them. The size is 1/4-20 x 1" long and shouldn't cost more then 0.15 to 0.20 cents for all 3 anywhere that sells bolts in bulk bins. When you take it apart to put the new bolts in I'd also wipe down both mating surfaces with some isopropyl alcohol or degreaser just incase you've got some bearing grease that ended up between them when you initially installed, which could be another reason for the slippage despite being tight.
Hope that helps.
Best Regards,
Ryan@RJM

__________________

Home of the A.F.P. Upgraded Clutch Pedal System. Smoother Launches, Smoother Shifts & Improved Clutch Control Like No Other Pedal Mod You've Experianced Before Guaranteed!
Visit www.RJMPerformance.com or Email Ryan@RJMPerformance.com Also Don't Forget to Like us on Facebook www.facebook.com/RJM-Performance

Rusty

Hey JL. When you get your new bolts. Get Grade 8's.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

JLarson

Much obliged to both of you for the rec.

__________________
2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ
2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

onzedge

__________________

Koni|Swift|Michelin|Motordyne|Berk|RJM Performance|Gates|SPL|Motul|Technafit|Ate Super Blue|Hawk
Tommy Kaira|Momo|Optima|Hella|Hotchkis|Red Line|ZSpeed|Stillen|B&M|H&R