![]() |
I just installed the GEN3, and now I am waiting to tuning all with UpRev remap. The product is very good. I am writing you to suggest something especially for
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#26 (permalink) |
Premium Member
![]() Join Date: Sep 2009
Location: Italy
Posts: 146
Drives: 370z
Rep Power: 16 ![]() |
![]()
I just installed the GEN3, and now I am waiting to tuning all with UpRev remap.
The product is very good. I am writing you to suggest something especially for European peoples! In fact I found some problems in mounting, but nothing very hard. 1) Eurpean cars mount the pop-up Hood system. After the plastic cover under the engine is removed, it's necessary to remove 2 of the 3 Pop Up sensors. (the three yellow sensor in the front of the car in the photo http://img827.imageshack.us/img827/9690/dscn2067a.jpg ) Do not unplug the wire, because I learnt that the unit detect the tampering and the system fails! After the front bumper is detatched, you will remove from the top the third sensor in the centre of the bumper. Only after these operations, the bumper is free to be removed. 2) European cars have 2 horns and the fix bracket overlap perfectly the space of the two K&N Filters! You must disconnect the horns, switch the centrals two screws (that are short), with the two on the left and right side of the top black brace. Then rotate the horns with its brackets and fix under the longer screws. The old brackets that fixed the horns, will be bent outward (arrows in the photo). Photo before: http://img580.imageshack.us/img580/4437/dscn2085a.jpg Photo after: http://img833.imageshack.us/img833/7788/dscn2096a.jpg 3) The shortest screws on the left and right side of the black top bracket works better, because they don't touch the Gen3 pipes, but in every case I suggest to place a rubber... Photo: http://img109.imageshack.us/img109/3429/dscn2095c.jpg 4) The A/C Line must be protected by mechanical vibrations. Photo: http://img28.imageshack.us/img28/4140/dscn2084q.jpg Expecially in the rear, after the hole. Before: http://img835.imageshack.us/img835/7373/dscn2092b.jpg After: http://img843.imageshack.us/img843/8756/dscn2094g.jpg (Note: the pipe is dirty because I used a dremel to enlarge the hole) 5) I suggest that the first thing to do is clean very well the Gen3 pipes, because they are very, very, very dirt! After that remains to enjoy the sound and the performace! Bye! Last edited by flashgordon; 06-12-2012 at 02:54 PM. |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[WTB] Stillen Gen 3 Intakes | ShockWave | Parts for sale (Private Classifieds) | 4 | 04-26-2012 10:18 PM |
WTB: Stillen G3 Intakes or K&N Typhoon intakes! | gromano | Parts for sale (Private Classifieds) | 5 | 07-15-2010 08:38 PM |
Wtb - stillen exhaust / stillen intakes / berk cats | xbigb4ller69z | Wanted | 0 | 03-24-2010 11:39 PM |
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP | bezzita | Australia/New Zealand | 29 | 09-27-2009 12:53 PM |
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP | bezzita | Engine & Drivetrain | 6 | 09-06-2009 05:20 PM |