Installing ARP wheel studs

edconline · 02-18-2014, 08:31 PM

Why did you have to take all that off, was it just to get the clearance to get to those 4 bolts? I thought that once the 32MM nut was off the front, and the 4 bolts were off the back, the wheel hub would slide right off the axle.. ? Also, if I do attempt it, anything else I should know, like anything I have to mark so it goes back on in the same spot, etc? Thanks!

Rusty · 02-18-2014, 11:52 PM

To remove the front hubs. All you have to do is. Back the 4 bolts out about 1/4". Put a socket and extention on one bolt. Now smack the end of the extention with a hammer a few times. Move on the next bolt. The hub will pop out.

For the rear hubs. Remove the axle nut. Next, remove the 4 bolts in the back of the hub. It's a tight fit in the back of the kuckle. It's best to use a 1/2" drive thin wall socket if you have one. Or use a 3/8" drive socket.

02-18-2014, 08:31 PM	#1 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 24	Why did you have to take all that off, was it just to get the clearance to get to those 4 bolts? I thought that once the 32MM nut was off the front, and the 4 bolts were off the back, the wheel hub would slide right off the axle.. ? Also, if I do attempt it, anything else I should know, like anything I have to mark so it goes back on in the same spot, etc? Thanks! __________________ View Journal Audio Build

02-18-2014, 11:52 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	To remove the front hubs. All you have to do is. Back the 4 bolts out about 1/4". Put a socket and extention on one bolt. Now smack the end of the extention with a hammer a few times. Move on the next bolt. The hub will pop out. For the rear hubs. Remove the axle nut. Next, remove the 4 bolts in the back of the hub. It's a tight fit in the back of the kuckle. It's best to use a 1/2" drive thin wall socket if you have one. Or use a 3/8" drive socket. edconline and Felix 808 like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARP Extended Wheel Studs	John@Z1	Tires/Wheels	13	11-26-2012 11:05 AM
350z/370z = Same Wheel Studs?	phunk	Wheels & Tires	27	07-05-2012 06:49 AM
Factory wheel studs or aftermarket?	cossie1600	Track / Autocross / Drifting / Dragstrip	0	08-19-2010 12:29 AM
FS: Nismo 60mm Wheel Studs (20)	M.Bonanni	Parts for sale (Private Classifieds)	3	07-02-2010 01:45 AM
OEM wheel hub bolts (studs)	old_account	Parts for sale (Private Classifieds)	2	06-06-2010 05:28 PM