DIY: illuminated kick plates color change

Cjanik · 07-23-2009, 12:31 AM

are you refering to the non-LED ones by saying "basic" ones? Or are you talking about going from stock orange to my modified ones?

The completed product does not look modified, There is no difference that is noticable, except the color when its illuminated. The stock wiring is still there. As a matter of fact, when you purchase a color set, I include the entire wiring harness and plugs necessary for a complete install. (minus double sided tape).

The benefit of having them already installed and then installing this, is you do not need to run all of the extra wiring to the stock wiring harness behind the console. The ones already installed have a plug about 1 foot away from the kick plates that you can just unplug and then plug these into.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Illuminated Kick Plates	ejrives	DIY Section (Do-It-Yourself)	133	07-12-2019 01:12 AM
Illuminated kick plates always on?	KptKIDLAT	Exterior & Interior	15	08-30-2012 10:08 PM
Illuminated kick plates in ANY Color	Cjanik	Parts for sale (Private Classifieds)	15	02-11-2011 11:19 AM
WTB: Illuminated Kick Plates	Boost_lee	Wanted	0	01-30-2011 03:28 PM
Illuminated Kick Plates	KptKIDLAT	DIY Section (Do-It-Yourself)	3	08-29-2010 08:53 AM

07-23-2009, 12:31 AM	#11 (permalink)
Cjanik Track Member Join Date: May 2009 Location: Las Vegas Posts: 578 Drives: N/A Rep Power: 19	are you refering to the non-LED ones by saying "basic" ones? Or are you talking about going from stock orange to my modified ones? The completed product does not look modified, There is no difference that is noticable, except the color when its illuminated. The stock wiring is still there. As a matter of fact, when you purchase a color set, I include the entire wiring harness and plugs necessary for a complete install. (minus double sided tape). The benefit of having them already installed and then installing this, is you do not need to run all of the extra wiring to the stock wiring harness behind the console. The ones already installed have a plug about 1 foot away from the kick plates that you can just unplug and then plug these into.