Diy- $5.00 round shift knob collar

nightwish · 07-20-2012, 04:35 PM

OK Simple way to get rid of that ugly gap once you replace the shift knob with a round one.. i went and found this item, power shower head and took the top piece off. Even my locking screw fit perfectly inside the top part and there wasnt a need for zip ties either to hold it.. just remember to keep the black plastic piece from factory knob under the boot cover...here is the pic.. im going to shot it black but you could even rap in cf...

nightwish · 07-20-2012, 04:37 PM

pics

nightwish · 07-20-2012, 04:38 PM

add-- there is a mm gap between the round knob and collar and going to find a rubber gasket a bit bigger than the locking nut to fill the gap

kenchan · 07-20-2012, 08:15 PM

ummmm... hummm... check with edub cause i think the knob manufacturer that did his actually sells the separate collars for round knobs.

nightwish · 07-25-2012, 08:30 AM

sorry for those earlier pic with the cell

kenchan · 07-25-2012, 10:10 AM

here you go. let's swap that out.

Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake

nightwish · 07-25-2012, 10:38 AM

I might decide later to get that collar but I'm good with this one until I do a short shifter swap but ty for your response bro

kenchan · 07-25-2012, 10:47 AM

np. GL with the short throw.

NickBaragona · 12-21-2014, 09:09 AM

Does that collar from Zeetoys come in black by any chance? I'm trying to make my interior completely black/red.

1LIFE · 12-21-2014, 09:14 AM

Quote:

Originally Posted by NickBaragona

Does that collar from Zeetoys come in black by any chance? I'm trying to make my interior completely black/red.

Z1 has them in black

NickBaragona · 12-21-2014, 09:28 AM

Quote:

Originally Posted by 1LIFE

Z1 has them in black

Thanks for the heads up!

07-20-2012, 04:35 PM	#1 (permalink)
nightwish Base Member Join Date: Jul 2012 Location: na Posts: 111 Drives: na Rep Power: 12	Diy- $5.00 round shift knob collar OK Simple way to get rid of that ugly gap once you replace the shift knob with a round one.. i went and found this item, power shower head and took the top piece off. Even my locking screw fit perfectly inside the top part and there wasnt a need for zip ties either to hold it.. just remember to keep the black plastic piece from factory knob under the boot cover...here is the pic.. im going to shot it black but you could even rap in cf...

07-20-2012, 04:37 PM	#2 (permalink)
nightwish Base Member Join Date: Jul 2012 Location: na Posts: 111 Drives: na Rep Power: 12	pics pics Last edited by nightwish; 05-03-2013 at 07:36 PM.

07-20-2012, 04:38 PM	#3 (permalink)
nightwish Base Member Join Date: Jul 2012 Location: na Posts: 111 Drives: na Rep Power: 12	add add-- there is a mm gap between the round knob and collar and going to find a rubber gasket a bit bigger than the locking nut to fill the gap

07-25-2012, 08:30 AM	#5 (permalink)
nightwish Base Member Join Date: Jul 2012 Location: na Posts: 111 Drives: na Rep Power: 12	more pic with camera sorry for those earlier pic with the cell Last edited by nightwish; 05-03-2013 at 07:36 PM.

07-25-2012, 10:38 AM	#7 (permalink)
nightwish Base Member Join Date: Jul 2012 Location: na Posts: 111 Drives: na Rep Power: 12	ty I might decide later to get that collar but I'm good with this one until I do a short shifter swap but ty for your response bro

07-20-2012, 08:15 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	ummmm... hummm... check with edub cause i think the knob manufacturer that did his actually sells the separate collars for round knobs.

07-25-2012, 10:10 AM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	here you go. let's swap that out. Zeetoyz Inc. - Nissan 350Z, Ring Kits, Engines, Cold Air Intake

07-25-2012, 10:47 AM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	np. GL with the short throw.

12-21-2014, 09:09 AM	#9 (permalink)
NickBaragona Enthusiast Member Join Date: Jun 2011 Location: Maryland Posts: 353 Drives: 40th 370Z Rep Power: 13	Does that collar from Zeetoys come in black by any chance? I'm trying to make my interior completely black/red. __________________ 20%Sides&Rear 55%Windshield l Rockford Fosgate Amp & P2D2 l Stillen CAI l F.I. CBE & LTH l GTR Start Button l

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Blox Shift Knob w/ rare collar	TPrelude-370z	Parts for sale (Private Classifieds)	12	05-23-2012 09:15 AM
SOLD: 7AT Red/Carbon Shift knob with OEM 6MT Shift boot (SW Florida)	TMAN1985	Parts for sale (Private Classifieds)	8	04-23-2012 09:01 PM
Help! I can't get that shift knob off...	metson	DIY Section (Do-It-Yourself)	15	06-28-2011 10:41 PM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 06:41 PM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM