DIY: of complete FOG LAMP install

ProfessorDave

OK, so I've read through this thread twice. There is so much great information. The problem is I have elementary electronic skills, and am looking for advice about a very specific application.

I recently ordered the EVO-R flashing fog light. It comes with two hot leads: one to make the light blink, the other to make the fog come on solid. I want to make the light blink when in reverse (pretty sure I know how to do that). I want to make the solid option switched.

So, my question is, do I need the fog light harness and switch for the solid option? Or is there a simpler solution (e.g, switch wired into access. power under center console, connected to fuse to hot lead)?

I have done some car wiring and can run and connect any kind of line or low voltage home wiring. But I'm confused about how to solve this, and would rather not spend the $ on the Z store harness if I don't have to.

Thanks!

__________________

Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB
Everything else: 2009 370z, PW Touring 6MT