DIY: of complete FOG LAMP install

SigPapa226 · 03-18-2010, 09:23 PM

My 2010 roadster came with the wire installed. Also, the old "blank" came out without a problem ... no issues with getting the nuts off. Maybe I'm just good at getting my nuts off.

Does anyone know exactly where that wire comes out? Details??? Pictures???

kielbasa16 · 03-19-2010, 08:31 AM

Ok well I will try to get some pictures up of my install. I also intend on tinting all the rear lights as I will be disassembling alot of the panels back there already. Oh boy....

kielbasa16 · 03-20-2010, 12:45 PM

Hey hopefully someone can help, I'm mid install, have the fog in place and all the panels off. All that's left is the actual wiring. As I'm no electrician I don't even know where to start. What should I wire it up to? I don't really know what a crimp is, and do I need extra wiring?? If someone knowledgable is available help a brother out haha.

03-18-2010, 09:23 PM	#1 (permalink)
SigPapa226 Base Member Join Date: Nov 2009 Location: Virginia Posts: 205 Drives: 300 ZXTT, 370 ZR Rep Power: 17	My 2010 roadster came with the wire installed. Also, the old "blank" came out without a problem ... no issues with getting the nuts off. Maybe I'm just good at getting my nuts off. Does anyone know exactly where that wire comes out? Details??? Pictures??? __________________ Black 300ZX TT Stock + Megan CBE; Black Cherry 370Z Roadster, 6MT, Touring, Sport, Nav., 3-way Fog Light (Running, brake & flashing backup), Triple Tone Air Horns.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fog Lamp install with DIY harness question	wdkwang	Exterior & Interior	10	03-02-2015 01:02 AM
Install of Stillen G3 Intakes complete - review, etc.	semtex	Intake/Exhaust	83	06-23-2010 12:19 PM
Forged Performance: TEIN Flex Install 370Z Complete	Sharif@Forged	Brakes & Suspension	37	02-19-2010 03:51 AM
Install complete ( Finally ) Item list, Cost, Time	355890	Audio & Video	11	06-28-2009 11:14 PM

03-19-2010, 08:31 AM	#2 (permalink)
kielbasa16 Track Member Join Date: Jun 2009 Location: NY Posts: 770 Drives: 09 Blk Z Spt Rep Power: 18	Ok well I will try to get some pictures up of my install. I also intend on tinting all the rear lights as I will be disassembling alot of the panels back there already. Oh boy....

03-20-2010, 12:45 PM	#3 (permalink)
kielbasa16 Track Member Join Date: Jun 2009 Location: NY Posts: 770 Drives: 09 Blk Z Spt Rep Power: 18	Hey hopefully someone can help, I'm mid install, have the fog in place and all the panels off. All that's left is the actual wiring. As I'm no electrician I don't even know where to start. What should I wire it up to? I don't really know what a crimp is, and do I need extra wiring?? If someone knowledgable is available help a brother out haha.