DIY: LED Halo w/Video's

DrJones · 06-09-2018, 06:50 PM

Hey all.

HELP!!!!!! (please

)

Tried wiring up 2x halo set of 90 mm and 60mm RGB halos from the retrofit source.

They are the prism profile's with the Morimoto bluetooth controller.

Been having issues with the LEDs. First off, they won't change color from amber.

Wiring the LEDs into the turn signal circuit and grounding the black wire to the chassis, i am able to have turn signal capabilities (it flashes when i turn but then I have no bluetooth control via the controller).

unwiring from the circuit board and going through just the bluetooth controller I get on/off functionality from the controller but no color change option. It does strobe though.

Any input on wiring would be very appreciated!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM

06-09-2018, 06:50 PM	#1 (permalink)
DrJones Base Member Join Date: Mar 2018 Location: Albuquerque Posts: 28 Drives: 2010 40th Anniv. Rep Power: 9	Hey all. HELP!!!!!! (please ) Tried wiring up 2x halo set of 90 mm and 60mm RGB halos from the retrofit source. They are the prism profile's with the Morimoto bluetooth controller. Been having issues with the LEDs. First off, they won't change color from amber. Wiring the LEDs into the turn signal circuit and grounding the black wire to the chassis, i am able to have turn signal capabilities (it flashes when i turn but then I have no bluetooth control via the controller). unwiring from the circuit board and going through just the bluetooth controller I get on/off functionality from the controller but no color change option. It does strobe though. Any input on wiring would be very appreciated!