DIY: LED Halo w/Video's

Meulen · 12-02-2013, 09:27 AM

I've searched around and can't find an answer....

Doing the demon eyes, does anyone have pictures on where to put the led's and how many they put in?

I'm using a multi color RGB LED if that helps

Nut_N_Much · 12-02-2013, 01:41 PM

Friend me, I have a photo album.

Main Projector I recommend using 6 or more LEDs. Image below..

Looking for the Turn Signal demon eye pic i have. I used 4 LEDs on that one and it was 2 bright I would use 2 or 3 LEDs.

Here it is.. Sorry, the image uploader doesn't resize it anymore, gotta do it manually.

Meulen · 12-02-2013, 02:04 PM

Quote:

Originally Posted by Nut_N_Much

Friend me, I have a photo album.

Main Projector I recommend using 6 or more LEDs. Image below..

Looking for the Turn Signal demon eye pic i have. I used 4 LEDs on that one and it was 2 bright I would use 2 or 3 LEDs.

Here it is.. Sorry, the image uploader doesn't resize it anymore, gotta do it manually.

AWESOME! thanks a ton!

Nut_N_Much · 12-02-2013, 02:13 PM

Quote:

Originally Posted by Meulen

AWESOME! thanks a ton!

Anytime,
The albums are New Set To Fix & Dual Halo... I try to put stuff in there people can use when they build there lights..

Can't wait to see them when your done..

FortuneLSX-TT · 12-02-2013, 03:57 PM

Quote:

Originally Posted by Nut_N_Much

Friend me, I have a photo album.

Main Projector I recommend using 6 or more LEDs. Image below..

Looking for the Turn Signal demon eye pic i have. I used 4 LEDs on that one and it was 2 bright I would use 2 or 3 LEDs.

Here it is.. Sorry, the image uploader doesn't resize it anymore, gotta do it manually.

Now you tell us

I went with 4 RGB's in each. 4 leds in the turn signal halo are WAAAAY too much lol. (melt my paint bright) Also the amount of wiring that is required for the RGB leds is a lot higher than the regular LEDs. I should have moved one or two to the main projector.

Since you're going with the RGBs, I take it you're either going to do your own soldering or have someone to do it for you. That was a PITA soldering those tiny resistors. I went ahead and color coded the wires for my RGBs to keep things straight when plugging it into the controller.

Nut_N_Much · 12-02-2013, 04:16 PM

Good point, If he bought the 5mm RGB LEDs 12v w/Resistors that come pre-wired he is good, if not than yep it's PITA. The COB RGB (Halos, Angle Eyes, Orbs) come with 12v resistors already. The LEDs pop up on Ebay from time to time 12v with resistors.. Luck of the draw on what color they have.

Robs lights had 4 RGB LED's on his main projector and they weren't bright enough for that big lens. Osiris and I were talking about this Ultra Blue Devil Demon Eyes LED Strips Module for Projector Headlights Retrofit | eBay as a possible solution. It can be mounted closer to the main projection lens. The problem is the projector were you drill and mount the LEDs is almost 6 inches away from the lens. This little thing can slide under the housing just above the lens. Trying to do mine to see if it works good enough to recommend.

.

Huck · 12-03-2013, 12:37 AM

I saw those on ijdmtoy and was wondering how those might work, honestly for $6 I didn't expect much from them. I'll be interested to hear your opinion of them

Zdayz 2014!!

Huck · 12-04-2013, 03:40 PM

There's always the chance that I'm wrong but I would think thay the sun coming from the outside of the lens shining into it would not be refracted back outwards but to the inside of the lens (behind the lens).

Zdayz 2014!!

VDC_OFF · 12-04-2013, 04:42 PM

I have had this problem on every dual halo setup I have done. One solution I am willing to try is using BBQ pit black paint which is meant for high temperatures. I will try this on my next project.

Huck · 12-06-2013, 12:18 AM

What about just good ole caliper paint? Thats supposed to stand temps of like 5000 degrees isn't it?

Zdayz 2014!!

Meulen · 12-06-2013, 10:37 AM

IDK about the caliper paint. I just sent my lights to the painter. He's going to tint the small flasher lens for me. Between that and using high quality automotive paint I'm hoping it will not be a problem on my lights.

Nut_N_Much · 12-08-2013, 09:03 AM

Caliper Paint, been there done that.. Because of the high temps it with stands it creates a cooking effect under the paint. Bubbles the plastic underneath, if you have a lens conversion done. Also the finish is a little dull.

AutoTouchUp.com has 3 stage paint to color match your car or a color you like. Primer, Base, Clear Coat. Extremely durable.

Also Krylon Paint is what most of us use.

Another option is HyDro Dip any color design you want, from basic to wild.

Also you can buy a airbrush Gun and us PPG, the best finishes. Need a clean space for it.

Huck · 12-08-2013, 09:42 AM

Joe I'm probably gonna just bring all my stuff to you when I have the money for it, I've got all the supplies but I just havent been motivated, and I dont feel like messing with all the wiring lol. I think I'll leave this one to the pros

Zdayz 2014!!

Huck · 12-08-2013, 09:43 AM

I want bells and whistles!!

Zdayz 2014!!

Meulen · 12-11-2013, 08:49 PM

Ok.....

I tested out the led strips. This is 6 LEDs on the inside of the projectors reflective shroud.

I'm just a little worried the 3m tape on the back won't stand up to the heat in there. So may add some adhesive to it

12-02-2013, 09:27 AM	#1 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3391	I've searched around and can't find an answer.... Doing the demon eyes, does anyone have pictures on where to put the led's and how many they put in? I'm using a multi color RGB LED if that helps __________________ Follow my build thread here: Meulens Build Journal

12-02-2013, 01:41 PM	#2 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Friend me, I have a photo album. Main Projector I recommend using 6 or more LEDs. Image below.. Looking for the Turn Signal demon eye pic i have. I used 4 LEDs on that one and it was 2 bright I would use 2 or 3 LEDs. Here it is.. Sorry, the image uploader doesn't resize it anymore, gotta do it manually. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 12-02-2013 at 01:52 PM.

12-03-2013, 12:37 AM	#7 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	I saw those on ijdmtoy and was wondering how those might work, honestly for $6 I didn't expect much from them. I'll be interested to hear your opinion of them Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-04-2013, 03:40 PM	#8 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	There's always the chance that I'm wrong but I would think thay the sun coming from the outside of the lens shining into it would not be refracted back outwards but to the inside of the lens (behind the lens). Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-04-2013, 04:42 PM	#9 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 45 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 18	I have had this problem on every dual halo setup I have done. One solution I am willing to try is using BBQ pit black paint which is meant for high temperatures. I will try this on my next project. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos

12-06-2013, 12:18 AM	#10 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	What about just good ole caliper paint? Thats supposed to stand temps of like 5000 degrees isn't it? Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-06-2013, 10:37 AM	#11 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3391	IDK about the caliper paint. I just sent my lights to the painter. He's going to tint the small flasher lens for me. Between that and using high quality automotive paint I'm hoping it will not be a problem on my lights. __________________ Follow my build thread here: Meulens Build Journal

12-08-2013, 09:03 AM	#12 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 27	Caliper Paint, been there done that.. Because of the high temps it with stands it creates a cooking effect under the paint. Bubbles the plastic underneath, if you have a lens conversion done. Also the finish is a little dull. AutoTouchUp.com has 3 stage paint to color match your car or a color you like. Primer, Base, Clear Coat. Extremely durable. Also Krylon Paint is what most of us use. Another option is HyDro Dip any color design you want, from basic to wild. Also you can buy a airbrush Gun and us PPG, the best finishes. Need a clean space for it. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

12-08-2013, 09:42 AM	#13 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	Joe I'm probably gonna just bring all my stuff to you when I have the money for it, I've got all the supplies but I just havent been motivated, and I dont feel like messing with all the wiring lol. I think I'll leave this one to the pros Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-08-2013, 09:43 AM	#14 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 34	I want bells and whistles!! Zdayz 2014!! __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

12-11-2013, 08:49 PM	#15 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3391	Ok..... I tested out the led strips. This is 6 LEDs on the inside of the projectors reflective shroud. I'm just a little worried the 3m tape on the back won't stand up to the heat in there. So may add some adhesive to it __________________ Follow my build thread here: Meulens Build Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM