DIY: LED Halo w/Video's

Nut_N_Much · 05-19-2013, 03:05 PM

Quote:

Originally Posted by Hopefulki

Hi there, quick question.

I am finishing off my halos (thank you so much to everyone in this thread) and I wanted to confirm the wiring for the Lightwurkz kit.

I have two wires Tan (-) and White (+). On the parking light there are 3 wires black (ground), Blue and Yellow. How should I be connecting these? I feel the answer is simple but many fumes and lack of sleep have given me a mental block.

I thought yellow (+) and black (-)

Thanks so much

Yes,
Yellow is the constant power on the parking light wiring. I have used it on most of the lights I have built. Black is the negative.
I PM'd you, also attached my cell number if you need any help!

I would test you LightWurkz wires on the battery to make sure (+) & (-) are correct. My kit White was (+), but check it anyway! You don't want to put them back together and not have them work.

How: I do it is I take a lighter and soften up the wire covering, then with some needle nose pliers or something like that I pull enough rubber off to allow you to solder. All you need is to expose enough wire to solder your lightwurz wires to. When your done soldering wrap them up with some electrical tape.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM