DIY: LED Halo w/Video's

Z_Society · 06-02-2013, 03:29 PM

Just did mine today

Nut_N_Much · 06-02-2013, 04:56 PM

Quote:

Originally Posted by Z_Society

Just did mine today

Nice work, what type of halo did you go with for these. They look awesome

. Congrats..

chpt11 · 06-02-2013, 08:32 PM

Quote:

Originally Posted by Z_Society

Just did mine today

Looks Awesome!

Z_Society · 06-02-2013, 10:49 PM

Quote:

Originally Posted by Nut_N_Much

Nice work, what type of halo did you go with for these. They look awesome

. Congrats..

thanks man, i went with the uv purple by oracle and decided to give it some contrast w/ the black housing

Z_Society · 06-02-2013, 10:49 PM

Quote:

Originally Posted by chpt11

Looks Awesome!

thaks

SR370z · 06-03-2013, 05:57 PM

I still need to grow a pair haha it's been 8 months and I still can't do it...

hjo1078 · 06-06-2013, 11:16 AM

djtodd · 06-06-2013, 11:32 AM

Nice

Digression...

Has anyone tried/thought about hydrographics? Curious as to how they would hold up, especially on the projector housing.

Edit: nm, saw one of the previous posts. Looks suhweet!

Nut_N_Much · 06-10-2013, 06:11 PM

Quote:

Originally Posted by hjo1078

Finished my lights. Was not happy w the paint job so i redid it all over again.
Before
Attachment 70525

After
Attachment 70533

Will put everything back on tomorrow. Will post pics once im done. Im super happy w the carbon wrap.

Very nice job man.. I don't have the patience to try something like that.. It came out really good. Awesome lights..

djtodd:

I checked on prices a wile back and the cost was too much for me, but I was asking for CF look and some custom stuff. Strait color may cost less.

sselemit · 07-04-2013, 02:53 PM

Can I use this to replace the old sealant?

Red Devil 0698AG Butyl Rubber Sealant, 10.1-Ounce, Aluminium Gray - Amazon.com

Nut_N_Much · 07-04-2013, 04:16 PM

Quote:

Originally Posted by sselemit

Can I use this to replace the old sealant?

Red Devil 0698AG Butyl Rubber Sealant, 10.1-Ounce, Aluminium Gray - Amazon.com

I don't see why not. No one has used this stuff before. I tend to use what others have proven works. It's a sealant, I hope you can open back up later if you need to. Just in case LEDs burn out you want to be able to go back in and replace them.

That stuff looks like it would work. If you use it, let us know what the out come is..

sselemit · 07-05-2013, 12:13 AM

Well, since the tube is Butyl Rubber, the same material that was used by the manufacturer, but in semi-liquid form which makes resealing easier by skipping the re-heating step. That's my 2 cents logic.

markthomas69 · 07-05-2013, 10:17 AM

Quote:

Originally Posted by hjo1078

Finished my lights. Was not happy w the paint job so i redid it all over again.
Before
Attachment 70525
Attachment 70526
Attachment 70527
Attachment 70528
Attachment 70529
Attachment 70530

After
Attachment 70531
Attachment 70532
Attachment 70533

Will put everything back on tomorrow. Will post pics once im done. Im super happy w the carbon wrap.

Where did you get the CF wrap from?

Nut_N_Much · 07-05-2013, 01:42 PM

Quote:

Originally Posted by markthomas69

Where did you get the CF wrap from?

3m Vinyl http://www.ebay.com/bhp/3m-carbon-fiber-vinyl

I wouldn't use the 3M DiNoc. After warming a few times it gets stiff and none pliable.

sselemit · 07-07-2013, 08:59 PM

As you know, the new morimoto version xBALED has a small tab sticking out which is a b***h. The old version xBLED has the connection on the back of the ring. I guess the engineer guy just went full retard at some point during the process of designing the new ring

. Anyhow, here is my little modification:

I re-soldered the wires to make them sideway to reduce the clearance.

Next, I drilled a hole close as much as possible to the edge, but not quiet going over it to ensure enough clearance for the tab.

Then, i shaved quiet a bit off about a quarter of the ring.

Viola, PERFECT fitment, just like OEM. You have to look very closely to see the gap.

06-03-2013, 05:57 PM	#306 (permalink)
SR370z Base Member Join Date: Oct 2012 Location: Utah Age: 34 Posts: 79 Drives: 12' Red 370z S 6MT Rep Power: 12	I still need to grow a pair haha it's been 8 months and I still can't do it... Nut_N_Much likes this.

06-06-2013, 11:16 AM	#307 (permalink)
hjo1078 Track Member Join Date: May 2011 Location: virginia Age: 45 Posts: 572 Drives: twin turbo 370z Rep Power: 5394	Finished my lights. Was not happy w the paint job so i redid it all over again. Before ImageUploadedByTapatalk1370534808.055581.jpg ImageUploadedByTapatalk1370535031.366182.jpg ImageUploadedByTapatalk1370535048.382094.jpg ImageUploadedByTapatalk1370535159.164308.jpg ImageUploadedByTapatalk1370535180.864169.jpg ImageUploadedByTapatalk1370535197.514165.jpg After ImageUploadedByTapatalk1370535227.879841.jpg ImageUploadedByTapatalk1370535238.464682.jpg ImageUploadedByTapatalk1370535305.348613.jpg Will put everything back on tomorrow. Will post pics once im done. Im super happy w the carbon wrap. Mr&Mrs, Nut_N_Much and markthomas69 like this.

06-06-2013, 11:32 AM	#308 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	Nice Digression... Has anyone tried/thought about hydrographics? Curious as to how they would hold up, especially on the projector housing. Edit: nm, saw one of the previous posts. Looks suhweet! MIGHTYMOUSE and Nut_N_Much like this. Last edited by djtodd; 06-06-2013 at 11:52 AM.

07-07-2013, 08:59 PM	#315 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	Fitment mod As you know, the new morimoto version xBALED has a small tab sticking out which is a b***h. The old version xBLED has the connection on the back of the ring. I guess the engineer guy just went full retard at some point during the process of designing the new ring . Anyhow, here is my little modification: I re-soldered the wires to make them sideway to reduce the clearance. Next, I drilled a hole close as much as possible to the edge, but not quiet going over it to ensure enough clearance for the tab. Then, i shaved quiet a bit off about a quarter of the ring. Viola, PERFECT fitment, just like OEM. You have to look very closely to see the gap. 370zHawaii, VDC_OFF, Nut_N_Much and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Halo kit	rikkiphan1506	Exterior & Interior	3	01-31-2013 11:31 PM
Halo 4	The Dimer	The Lounge (Off Topic)	6	03-05-2012 03:41 PM
Z elininator drag Video's	Z eliminator	Canada	0	08-15-2010 03:41 PM
How To detailing video's	Kyle@STILLEN	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	2	03-02-2010 12:07 AM
Video's of the new arrival?	Shortbus	Nissan 370Z General Discussions	1	01-04-2009 05:14 PM

07-04-2013, 02:53 PM	#310 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	Can I use this to replace the old sealant? Red Devil 0698AG Butyl Rubber Sealant, 10.1-Ounce, Aluminium Gray - Amazon.com

07-05-2013, 12:13 AM	#312 (permalink)
sselemit Base Member Join Date: Apr 2011 Location: VA Posts: 58 Drives: '10 Z34 Blue 7AT NAV Rep Power: 14	Well, since the tube is Butyl Rubber, the same material that was used by the manufacturer, but in semi-liquid form which makes resealing easier by skipping the re-heating step. That's my 2 cents logic.