Steering Lock: cut one wire. /switch optional

bdl99 · 05-20-2012, 06:02 PM

Quote:

Originally Posted by Baer383

That's what I don't get unplug the harness cut and install 2 pigtails and reinstall,I don't see the problem,if you cut the wire and don't want it like that anymore plug the 2 pigtails together.

You can't unplug both ends of the existing car harness. You can unplug the plug from the steering lock but the other end is part of the wiring loom. Take a look and you will see what everyone is talking about.

As I said, you can do what you are saying, but you will have to do in the car with little room to play with. If the connectors were not available then I would do as you say, but then I'm good with a soldering iron and car wiring.

Baer383 · 05-20-2012, 06:08 PM

Quote:

Originally Posted by bdl99

You can't unplug both ends of the existing car harness. You can unplug the plug from the steering lock but the other end is part of the wiring loom. Take a look and you will see what everyone is talking about.

As I said, you can do what you are saying, but you will have to do in the car with little room to play with. If the connectors were not available then I would do as you say, but then I'm good with a soldering iron and car wiring.

I didn't know that the harness doesn't come out,I would still put the electrical connectors on it but I already have a "D" lock.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering lock failure	Terrace	Canada	52	06-16-2013 09:32 PM
Those of you who have had Steering Lock Failure	Thechidz	Nissan 370Z General Discussions	449	01-12-2013 05:05 PM
Steering Lock Elimination	Vince	Exterior & Interior	38	05-18-2012 10:43 AM
Wire ties on steering rack boot?	ferrari_rich	Nissan 370Z General Discussions	6	02-02-2010 07:56 PM
Illuminated door lock switch question	MightyBobo	Exterior & Interior	7	04-05-2009 02:23 AM