|
I had very good luck using interior pry tools to pop the harness off. It took longer for me to take the front bumper off than to do the headlights.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
03-30-2014, 04:33 PM
|
#29 (permalink) |
|
A True Z Fanatic
Join Date: Mar 2013
Location: Massachusetts
Posts: 1,400
Drives: 09 370Z MT6
Rep Power: 667   |
I had very good luck using interior pry tools to pop the harness off. It took longer for me to take the front bumper off than to do the headlights. I used
Amazon.com: Amico Auto Vehicle Blue Loudspeaker Audio Dismantle Removal Pry Tool Set 4 in 1: Automotive If you go behind the clip where you need to press the tabs, wedge this tool in there and it'll pop right out. I removed the washer tank on the passenger side to make it easier to get the clip from underneath. On the driver side, I attacked it from the top. The tools are worth every penny, it makes popping any harness off that much easier than pinching w/ your fingers.
__________________
fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Bumper/headlight removal questions | Slowfashow | Exterior & Interior | 4 | 01-05-2013 03:52 AM |
| DIY Headlight Moisture Removal | Nut_N_Much | DIY Section (Do-It-Yourself) | 3 | 12-02-2012 09:46 PM |
| Headlight removal | hyunsoo1803 | Exterior & Interior | 3 | 06-21-2012 10:53 PM |
| help with gum removal | thispecialk | Nissan 370Z General Discussions | 7 | 08-05-2009 10:41 AM |
18Likes
Threaded Mode
