Quote:
Originally Posted by jmlenz
any suggestions on easily removing those plastic pop rivets? I just used 2 flathead screwdrivers on either side and pulled like hell. I broke about 3 of them. Is there a pop rivet puller that anyone uses? This was prob the hardest part of removing the bumper lol
|
Removal:
Take a thin screwdriver or a dull awl and push in the center of the plastic pop rivet. This will allow the rivet to be removed easily.
Reinsertion:
Push the small center pin through the rivet to the top (don't remove it, but it should be sticking out of the head of the pop rivet). Push the rivet back in the hole and then press the center pin into the rivet to lock it back in place