DIY: Sway bar installation (rear)

1slow370 · 03-17-2010, 03:41 AM

don't forget to say to unbolt the large rear brace. I see you did it in a pic but didn't see the instruction for doing that there is now way to get that bar off with it still on.

ChrisSlicks · 03-17-2010, 07:31 AM

Quote:

Originally Posted by 1slow370

don't forget to say to unbolt the large rear brace. I see you did it in a pic but didn't see the instruction for doing that there is now way to get that bar off with it still on.

Yes you are right, I will correct the instructions. I think you could probably leave the front of the brace loosely connected as it is tough to get back into position doing it by yourself.

benjams · 08-10-2013, 06:42 PM

Easy install, thanks for the great directions. It was a tight fit but unbolting the rubber exhaust hangers made it much, much easier.

haitech · 10-10-2013, 11:23 PM

Quote:

Originally Posted by benjams

Easy install, thanks for the great directions. It was a tight fit but unbolting the rubber exhaust hangers made it much, much easier.

I had to unbolt the hangers also.

Great DIY!

03-17-2010, 03:41 AM	#1 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	don't forget to say to unbolt the large rear brace. I see you did it in a pic but didn't see the instruction for doing that there is now way to get that bar off with it still on. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY installation of genuine factory rear spoiler....	simota1	DIY Section (Do-It-Yourself)	60	04-10-2018 11:44 AM
DIY: Sway bar installation (front)	ChrisSlicks	DIY Section (Do-It-Yourself)	68	05-01-2017 12:13 PM
WTB::NY:: Rear OEM sway bar	nelson89	Wanted	9	08-29-2014 09:15 AM
Sway Bar Installation Question	joshs09slvrZ	Brakes & Suspension	6	02-18-2012 08:28 AM
Rear spoiler installation	jb370z	Exterior & Interior	2	04-05-2010 02:16 PM

08-10-2013, 06:42 PM	#3 (permalink)
benjams Base Member Join Date: Apr 2012 Location: San Diego Posts: 24 Drives: Real fast sometimes Rep Power: 15	Easy install, thanks for the great directions. It was a tight fit but unbolting the rubber exhaust hangers made it much, much easier.