|
Billy, I had planned to use straight Aeroquip fittings off the Mocal plate directed to the front of the car...approx 90 deg from the "bottom" position but found this was
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
04-24-2010, 10:56 PM
|
#11 (permalink) |
|
Base Member
 
Join Date: Mar 2010
Location: Ft. Worth, TX
Posts: 20
Drives: 2009 370Z NISMO 0357
Rep Power: 17  |
Billy,
I had planned to use straight Aeroquip fittings off the Mocal plate directed to the front of the car...approx 90 deg from the "bottom" position but found this was just not possible due to other engine componets/sway bar. You can play with it but I think you too will find it not to be an option. Good luck |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Threaded Mode
