|
My understanding is that with thermostatic sandwich plates (Mocal) flow below the temp setting i.e. 180 is 90/10 meaning the flow through the sandwich to the oil cooler is 10%
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
04-22-2010, 02:10 PM
|
#1 (permalink) |
|
Base Member
 
Join Date: Mar 2010
Location: Ft. Worth, TX
Posts: 20
Drives: 2009 370Z NISMO 0357
Rep Power: 17  |
My understanding is that with thermostatic sandwich plates (Mocal) flow below the temp setting i.e. 180 is 90/10 meaning the flow through the sandwich to the oil cooler is 10% of max or 90% restricted. As temps climb above 180 the ratio changes and thus more oil is allowed to enter the oil cooler. I opted to scratch build my oil cooler and the process was quite easy with the help of this and Vipors DIY. Of note, I did prefill my oil cooler just prior to final intall
|
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Real Auto Dynamics built and R/T tuned built motor TT | Mr.Squeeze | Forced Induction | 132 | 04-18-2014 06:09 PM |
| Anyone done a DIY for a 34r cooler install? | bigdog1250 | DIY Section (Do-It-Yourself) | 7 | 07-05-2012 10:38 AM |
| Oil Cooler Install | Zedx | Engine & Drivetrain | 10 | 05-19-2011 02:35 AM |
| install oil cooler? | Mt Tam I am | Nissan 370Z General Discussions | 5 | 08-25-2010 09:08 AM |
17Likes
Hybrid Mode
