DIY: Oil Cooler (scratch built install, lottsa pics).....>.

teejnut · 02-27-2010, 02:42 PM

Quote:

Originally Posted by Modshack

Mine is the 598 also and according to the aeroquipt guy in the above post, that is the correct hose.

Did you lube the inside of the hose when you assembled it? (I did). Wondering if this is a variable in breaking the inner liner. Regardless, I think clamping is now the way to go on these..
I'll source smooth band clamps from McMaster-Carr and update the original post with pics when I get this done..

From those threads sounds like FC598 works but FC332 is better? I might have found a local source for Fc332 going to look into that. Be interested in what kind of clamps you find.

No I didn't use lube and it seemed to go in pretty easily, wasn't that hard to push it in.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM