DIY: Oil Cooler (scratch built install, lottsa pics).....>.

MattP725 · 08-24-2011, 09:13 PM

Can anyone tell me what size the fitting is coming out of the sandwhich plate? I know the hose end is 10an obviously but what is the other side. I think the used setup I bought has the wrong size because it doesn't thread in very far... I'm pretty sure that isn't normal. I'll have to order new ones.

ChrisSlicks · 08-25-2011, 06:24 AM

The Mocal sandwich plate uses BSP fittings, someone may have attempted to use an NPT fitting which will work but will get hung up halfway in. If it isn't leaking I would be tempted to leave it.

The fitting you likely need is 1/2" BSP to -10 AN. There is also a high-flow version of the sandwich plate that uses 22mm fittings but I haven't seen anyone use that one yet. Of course this is assuming that it is a Mocal.

08-25-2011, 06:24 AM	#2 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 655	The Mocal sandwich plate uses BSP fittings, someone may have attempted to use an NPT fitting which will work but will get hung up halfway in. If it isn't leaking I would be tempted to leave it. The fitting you likely need is 1/2" BSP to -10 AN. There is also a high-flow version of the sandwich plate that uses 22mm fittings but I haven't seen anyone use that one yet. Of course this is assuming that it is a Mocal. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved)	djpathfinder	DIY Section (Do-It-Yourself)	21	11-30-2015 05:47 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 06:09 PM
Anyone done a DIY for a 34r cooler install?	bigdog1250	DIY Section (Do-It-Yourself)	7	07-05-2012 10:38 AM
Oil Cooler Install	Zedx	Engine & Drivetrain	10	05-19-2011 02:35 AM
install oil cooler?	Mt Tam I am	Nissan 370Z General Discussions	5	08-25-2010 09:08 AM

08-24-2011, 09:13 PM	#1 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 19	Can anyone tell me what size the fitting is coming out of the sandwhich plate? I know the hose end is 10an obviously but what is the other side. I think the used setup I bought has the wrong size because it doesn't thread in very far... I'm pretty sure that isn't normal. I'll have to order new ones.