DIY: Greddy Turbo Aluminum Oil Pan as an additional oil cooling option

wind.zero · 01-07-2012, 09:18 AM

The pan does not require an oil pickup spacer. I did call GReddy and verified that the pan itself does not come with any mounting hardware. It is considered a replacement part from their TT kit. So be prepared to source your own hardware. Most of the stock pieces are too short.

Good luck with your install.

theaudir8fan · 01-08-2012, 02:23 PM

Quote:

Originally Posted by wind.zero

The pan does not require an oil pickup spacer. I did call GReddy and verified that the pan itself does not come with any mounting hardware. It is considered a replacement part from their TT kit. So be prepared to source your own hardware. Most of the stock pieces are too short.

Good luck with your install.

Thanks for the information, much appericated

conmam · 11-29-2012, 02:52 PM

VERY NICE. VERY INFORMATIVE. I AM PLANNING TO INSTALL ONE MY SELF FOR 2 REASONS :

1)) NEED MORE OIL TO PREVENT POSSIBLE OIL STARVATION DURING VERY HARD TURNS ( 1.3g - 1.4g ) AT 7000+ RPM

2)) THE OIL PAN BAFFLE PLATE DESIGN, EVEN THOUGH NOT TO MY EXPECTATION, DOES HELP PREVENTING OIL STARVATION DURING HARD TURN AS WELL.

THANK YOU FOR YOUR INFORMATION

11-29-2012, 02:52 PM	#3 (permalink)
conmam Base Member Join Date: Oct 2010 Location: Billings, Montana Posts: 164 Drives: 370Z Touring 6MT Rep Power: 15	Great set up VERY NICE. VERY INFORMATIVE. I AM PLANNING TO INSTALL ONE MY SELF FOR 2 REASONS : 1)) NEED MORE OIL TO PREVENT POSSIBLE OIL STARVATION DURING VERY HARD TURNS ( 1.3g - 1.4g ) AT 7000+ RPM 2)) THE OIL PAN BAFFLE PLATE DESIGN, EVEN THOUGH NOT TO MY EXPECTATION, DOES HELP PREVENTING OIL STARVATION DURING HARD TURN AS WELL. THANK YOU FOR YOUR INFORMATION

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intense Cooling Specials! Beat the HEAT w/ Mishimoto, Koyo, Samco, Greddy and more!-	INTENSEPOWER	Drivetrain/Engine	39	08-29-2011 01:21 PM
Greddy Turbo TI-C or Greddy Spectrum Elite?	Andy124	Intake/Exhaust	32	06-05-2011 02:34 PM
Nismo - Greddy Turbo Ti-C	adidasboy1186	Intake/Exhaust	16	11-15-2010 10:58 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 05:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 07:26 PM

01-07-2012, 09:18 AM	#1 (permalink)
wind.zero Enthusiast Member Join Date: Apr 2011 Location: The 49th State Posts: 296 Drives: NISMOSIS Rep Power: 15	The pan does not require an oil pickup spacer. I did call GReddy and verified that the pan itself does not come with any mounting hardware. It is considered a replacement part from their TT kit. So be prepared to source your own hardware. Most of the stock pieces are too short. Good luck with your install.