06-28-2011, 10:09 PM
|
#11 (permalink)
|
|
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,732
Drives: 🔰
Rep Power: 10
|
Quote:
Originally Posted by CGMMNY
Bump. Really could use some pointers regarding the 2nd bolt on the drivers side before I rip the door handle off........
|
I used a 10mm 1/4 drive short socket with an extension? I loosened the bolt just before it was totally free and used a Magnet on the extension to hold the bolt to the socket and pulled it out. I recommend you make sure you have the bolt attached to the socket when pulling it out while magnetized, this is to make sure you don't drop the 10mm bolt in the door frame. The driver side door handle has a hex head bolt that also needs to be removed its just below the door jam.
Last edited by Trips; 06-28-2011 at 10:12 PM.
|
|
|
Similar Threads
27Likes
Threaded Mode
